الگو:Infobox engine/توضیحات

ب‌ام‌و اس۶۵بی۴۰او۰
ب‌ام‌و اس۶۵بی۴۰او۰
توضیحات کلی
تولید کننده	ب‌ام‌و
دیگر نام‌ها	مونستر
تولید	۲۰۰۷–۲۰۱۳
طرح
نوع موتور	۹۰° هشت سیلندر
حجم موتور	۴٫۰ لیتر؛ ۲۴۴٫۰ اینچ مکعب (۳٬۹۹۹ سانتی‌متر مکعب)
قطر سوراخ	۹۲ میلیمتر (۳٫۶۲۲ اینچ)
قطر پیستون	۷۵٫۲ میلیمتر (۲٫۹۶۱ اینچ)
بلوک سیلندر	آلومینیم و سلفون
سرسیلندر	آلومینیوم
نوع سوپاپ‌ها	میل‌سوپاپ بالاسری
نسبت تراکم	۱۲٫۰:۱
احتراق
سیستم سوخت رسانی	سوخت‌رسانی انژکتوری
ئی‌سی‌یو	ام‌اس‌اس۶۰
سوخت مصرفی	بنزین
خنک‌کاری موتور درون‌سوز	آب-کولاد
قدرت موتور
قدرت خروجی	۳۰۹ کیلووات (۴۱۴ اسب بخار)
گشتاور	۴۰۰ نیوتن متر (۲۹۵ پوند نیرو-فوت)
ابعاد
طول	۷۳۴ میلیمتر (۲۸٫۹ اینچ)
عرض	۵۰۵ میلیمتر (۱۹٫۹ اینچ)
ارتفاع	۶۱۱ میلیمتر (۲۴٫۱ اینچ)
وزن	۱۴۷ کیلوگرم (۳۲۴ پوند)
گاه شمار
بعد از	ب‌ام‌و اس۵۴
قبل از	ب‌ام‌و اس۸۸

{{{name}}}
{{{name}}}
	[[پرونده:{{{image}}}\|{{{image_size}}}\|جایگزین={{{alt}}}\|ایستاده={{{upright}}}]] {{{caption}}}
توضیحات کلی
تولید کننده	{{{manufacturer}}}
طراح	{{{designer}}}
دیگر نام‌ها	{{{aka}}}
تولید	{{{production}}}
طرح
نوع موتور	{{{configuration}}}
حجم موتور	{{{displacement}}}
قطر سوراخ	{{{bore}}}
قطر پیستون	{{{stroke}}}
بلوک سیلندر	{{{block}}}
سرسیلندر	{{{head}}}
نوع سوپاپ‌ها	{{{valvetrain}}}
نسبت تراکم	{{{compression}}}
دور بر دقیقه
Idle	{{{idle}}}
خط قرمز	{{{redline}}}
احتراق
سوپرشارژر	{{{supercharger}}}
توربوشارژر	{{{turbocharger}}}
سیستم سوخت رسانی	{{{fuelsystem}}}
ئی‌سی‌یو	{{{management}}}
سوخت مصرفی	{{{fueltype}}}
سیستم روغن موتور	{{{oilsystem}}}
خنک‌کاری موتور درون‌سوز	{{{coolingsystem}}}
قدرت موتور
قدرت خروجی	{{{power}}}
تراکم قدرت	{{{specpower}}}
گشتاور	{{{torque}}}
ابعاد
طول	{{{length}}}
عرض	{{{width}}}
ارتفاع	{{{height}}}
قطر	{{{diameter}}}
وزن	{{{weight}}}
انتشار گاز
سطح انتشار گاز	{{{emissions level}}}
گاه شمار
بعد از	{{{predecessor}}}
قبل از	{{{successor}}}

این زیرصفحهٔ مستندات الگو:Infobox engine است.
این شامل اطلاعات استفاده، الگوها، پیوندهای بین زبانی و سایر اطلاعات است که در اصل الگو صفحه قرار نمی‌گیرد.

به‌کارگیری[ویرایش]

This template is used in articles about engines.

See the Parameters section of this document for basic explanations of what data to enter in each parameter.
See WikiProject Automobiles/Conventions for detailed explanations of what data to enter in certain parameters and instructions on how to correctly format the data.
When entering more than one data point per parameter, use the unbulleted list template {{ubl | fact one | fact two | et cetera}} to put each entry on a separate line. Do not use {{سخ}} to create line breaks in the infobox.
In the infobox templates below, conversion templates have been provided for your convenience. After copying the infobox template into the article, enter the data, replacing "NNNN" with numeric entries. When entering data into the conversion template, enter digits without thousands separators; i.e. 4287 not 4,287.

{{Infobox automobile engine
| name          =
| image         =
| manufacturer  =
| aka           =
| production    =
| predecessor   =
| successor     =
| configuration =
| displacement  =
| bore          =
| stroke        =
| block         =
| head          =
| valvetrain    =
| compression   =
| supercharger  =
| turbocharger  =
| fuelsystem    =
| management    =
| fueltype      =
| oilsystem     =
| coolingsystem =
| idle          =
| redline       =
| power         =
| specpower     =
| torque        =
| length        =
| width         =
| height        =
| diameter      =
| weight        =
| emissions level =
| emissions control =
}}

Parameters[ویرایش]

name: Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
Examples: M104 or EcoBoost or N53 or Atlas
image: Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle
See WikiProject Automobiles/Images
manufacturer: Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
designer: Person responsible for the development of the engine (this should be one or more natural persons)
aka: Other common or popular names used by the public or by the manufacturer in marketing materials
Examples: Cobra-Jet or Hemi
production: Calendar year range when the engine was produced, not the model year
Months are recommended if available, but exact dates are discouraged.
Examples: ۱۹۰۱ (۱۹۰۱)-۱۹۰۲ (۱۹۰۲) or ژانویه ۱۹۰۱ (۱۹۰۱-01)-فوریه ۱۹۰۲ (۱۹۰۲-02) but not ۳۱ ژانویه ۱۹۰۱ (۱۹۰۱-01-۳۱)-۲۸ فوریه ۱۹۰۲ (۱۹۰۲-02-۲۸).
Use {{Start date|yyyy}}-{{End date|yyyy}} or {{Start date|yyyy|mm}}-{{End date|yyyy|mm}} where yyyy is the year and mm is the numeric month.
predecessor: Name of older or previous engine that was replaced by the engine listed in the Name field of the infobox
Leave blank if this does not apply.
successor: Name of newer or next engine that replaced the engine listed in the Name field of the infobox
Leave blank if this does not apply.
configuration: Arrangement and number of cylinders or rotors
Examples: Straight-6, Flat-4, V8 or W12. See Engine configuration.
displacement: Engine displacement in litres or cubic centimeters may be used where appropriate
Use {{convert|x.x|L|cuin|abbr=on}} where x.x is the displacement in liters or {{convert|xxxx|cc|cuin|abbr=on}} where xxxx is the displacement in cubic centimenters.
Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev|xxx}} where xxx is the displacement in cubic inches.
See WikiProject Automobiles/Conventions - Displacement.
bore: Measurement of the cylinder bore in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the bore in millimeters.
stroke: Measurement of the piston stroke in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the stroke in millimeters.
block: Material used to construct the engine block
Examples: cast iron or aluminum
head: Material used to construct the Cylinder head
Examples: cast iron or aluminum
valvetrain: Description of the valvetrain
Examples: DOHC, OHC or OHV
compression: Engine compression ratio
Example: 10:1
supercharger: Manufacturer, model and type of superchager if known, otherwise type of supercharger
Example of manufacturer, model and type: [[Eaton Corporation|Eaton]] R410 TVS roots type
Examples of types: Roots, Lysholm screw, Sliding vane or Scroll
Leave blank if this does not apply.
turbocharger: Number of turbochargers (single, dual, quad, etc.) and manufacturer and model if known, otherwise number of turbochargers
Example: Single [[IHI Corporation|IHI]] VF48 or Twin [[Honeywell]] GT15 or Quad [[IHI Corporation|IHI]] VN65
Leave blank if this does not apply.
fuelsystem: Fuel delivery system
Examples: carburetor, fuel injection
If carburetted, state make and model of carburetor if known.
Examples: [[Solex]] 34 or [[Weber carburettor|Weber]] 45
If fuel injected state make, model and characteristics of fuel injection system if known.
Example: [[Robert Bosch GmbH|Bosch]] [[Jetronic#KE-Jetronic (1985–1993)|KE-Jetronic]] electronically-controlled, mechanical fuel injection
management: Type of engine management system
fueltype: Fuel used to cause combustion or movement of the pistons
Examples: gasoline, diesel, steam etc.
oilsystem: Type of oil system
Examples: wet sump, dry sump, etc.
coolingsystem: Type of cooling system
Examples: air-cooled, water-cooled, oil-cooled, etc.
idle: Governed idle rpm i.e. the speed engine rotates under no load under minimal throttle to sustain engine functions.
redline: Redline i.e. the maximal speed engine is designed to be operated continuously at full throttle under load. Not to be confused with high idle and maximal governed RPM.
power: Engine power
For engines used in U.S. home market cars use {{convert|xxx|hp|kW|abbr=on}} where xxx is the power in horsepower (hp).
For engines used in Japanese home market cars use {{convert|xxx|PS|kW hp|abbr=on}} where xxx is power in metric horsepower (PS).
For engines used in British home market cars use {{convert|xxx|bhp|kW PS|abbr=on}} where xxx is power in brake horsepower (bhp).
For engines used in rest-of-world home market cars use {{convert|xxx|kW|hp|abbr=on}} where xxx is power in kilowatts (kW).
See WikiProject Automobiles/Conventions - Power.
specpower: Specific power
torque: Peak torque at a specified revolutions per minute (rpm)
For engines used in U.S. home market cars use {{convert|xxx|ft.lbf|Nm|abbr=on}} at yyyy rpm where xxx is the torque in foot-pounds and yyyy is the rpm.
For engines used in rest-of-world home market cars use {{convert|xxx|Nm|ft.lbf|abbr=on}} at yyyy rpm. where xxx is the torque in Newton meters and yyyy is the rpm.
See WikiProject Automobiles/Conventions - Torque.
length: Longest dimension of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the length in millimeters.
width: Shorter of the two length measurements of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the width in millimeters.
height: Maximum height of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the height in millimeters.
diameter: Diameter of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the diameter in millimeters.
Leave blank if this does not apply.
weight: Weight of the engine in kilograms
Use {{convert|xxx|kg|lb|abbr=on}} where xxx is the weight in kilograms.
emissions level: The most stringent emissions standard(s) the engine is tested to satisfy.
emissions control: Technology employed to control emissions below target level.

مثال[ویرایش]

{{Infobox engine
| name          = ب‌ام‌و اس۶۵بی۴۰او۰
| image         = BMW S65 Engine.JPG
| manufacturer  = [[ب‌ام‌و]]
| aka           = مونستر
| production    = ۲۰۰۷–۲۰۱۳
| predecessor   = ب‌ام‌و اس۵۴
| successor     = ب‌ام‌و اس۸۸
| configuration = ۹۰° هشت سیلندر
| displacement  = {{convert|3999|cc|L cuin|1|order=flip|abbr=on}}
| bore          = {{convert|92|mm|in|3|abbr=on}}
| stroke        = {{convert|75.2|mm|in|3|abbr=on}}
| block         = [[آلومینیم]] و [[سلفون]]
| head          = آلومینیوم
| valvetrain    = [[میل‌سوپاپ بالاسری]]
| compression   = ۱۲٫۰:۱
| supercharger  =
| turbocharger  =
| fuelsystem    = [[سوخت‌رسانی انژکتوری]]
| management    = ام‌اس‌اس۶۰
| fueltype      = [[بنزین]]
| oilsystem     =
| coolingsystem = [[آب-کولاد]]
| power         = {{convert|309|kW|0}}
| specpower     =
| torque        = {{convert|400|N.m|lb.ft|0|abbr=on}}
| length        = {{convert|734|mm|in|abbr=on}}
| width         = {{convert|505|mm|in|abbr=on}}
| height        = {{convert|611|mm|in|abbr=on}}
| diameter      =
| weight        = {{convert|147|kg|lb|abbr=on}}
}}