As shown in the figure above, AFM typically consists of the following features.;
Cantilever (1) : Small spring-like cantilever (1) is supported on the support (2) by means of a piezoelectric element (3) so as to oscillate the cantilever (1) at its eigen frequency ;
Sharp tip (4) which is fixed to open end of a cantilever (1) .
Detector (5) configured to detect the deflection and motion of the cantilever (1) .
Sample (6) will be measure by AFM are mounted on Sample stage (8).
xyz-drive (7) which permits a sample (6) and Sample stage (8) to be displaced in x, y, and z directions with respect to a tip apex(4)
Controllers and plotter (not shown).
Here, numbers surrounded by parentheses like "(1)" are sign to indicate feature (see Fig.3.). Datum coordination system (0) is intended to indicates the x-y-z direction.
برای به اشتراک گذاشتن – برای کپی، توزیع و انتقال اثر
تلفیق کردن – برای انطباق اثر
تحت شرایط زیر:
انتساب – شما باید اعتبار مربوطه را به دست آورید، پیوندی به مجوز ارائه دهید و نشان دهید که آیا تغییرات ایجاد شدهاند یا خیر. شما ممکن است این کار را به هر روش منطقی انجام دهید، اما نه به هر شیوهای که پیشنهاد میکند که مجوزدهنده از شما یا استفادهتان حمایت کند.
انتشار مشابه – اگر این اثر را تلفیق یا تبدیل میکنید، یا بر پایه آن اثری دیگر خلق میکنید، میبایست مشارکتهای خود را تحت مجوز یکسان یا مشابه با ا اصل آن توزیع کنید.