پروتئینها مواد آلی بزرگ و یکی از انواع درشتمولکولهای زیستی هستند که از زیرواحدهایی به نام اسید آمینه ساخته شدهاند. پروتئینها مانند زنجیری از یک کلاف سهبعدی بسپارهایی هستند که از ترکیب اسیدهای آمینه حاصل میشوند. اسیدهای آمینه مثل یک زنجیر خطی توسط پیوند پپتیدی میان گروههای کربوکسیل و آمین مجاور به یکدیگر متصل میشوند تا یک پلی پپتید را به وجود بیاورند.
ترتیب اسیدهای آمینه در یک پروتئین توسط ژن مشخص میشود. اگرچه کد ژنتیک ۲۰ تا اسید آمینه استاندارد را معرفی میکند، اما در بعضی از اندامگانها (ارگانیسمها) کد ژنتیک شامل سلنوسیستئین و در بعضی از آرکیباکتریها پ یرولزین میباشد. گاهی در پروتئینها دگرگونی به وجود میآید: یا قبل از آنکه پروتئین بتواند به وظایفش در یاخته عمل کند یا به عنوان قسمتی از مکانیسم بازرسی. پروتئینها معمولاًبه یکدیگر میپیوندند تا یک وظیفهای را با یکدیگر انجام دهند که این خود باعث استوار شدن پروتئین میشود. چون ترتیبهای نامحدودی در توالی و طول زنجیره اسید آمینهها در تولید پروتئینها وجود دارد، از این رو انواع بیشماری از پروتئینها نیز میتوانند وجود داشته باشند. پروتئینهای درونیاختهای در بخشی از یاخته به نام ریبوزوم توسط آرانای (RNA) ساخته میشوند.
ساختار پروتئین یا ساختمان پروتئین به ساختاری گفته میشود که پروتئین به خود میگیرد. پروتئین دارای چهار نوع ساختار میباشد.
روشهای تعیین ساختار پروتئین، کشف ساختار سوم و چهارم یک پروتئین راهنمای بسیار مهمی برای تعیین کارکرد این پروتئین است. از روشهای معمول میتوان به پراش اشعه ایکس و تشدید مغناطیسی هسته اشاره کرد<این دو روش اطلاعات اتمی خوبی دربارهٔ ساختار پروتئین مورد نظر جمعآوری میکنند.
cryo-electron microscopy روش دیگری است برای مطالعه ساختار پروتئین که معمولاً در دمای نزدیگ به نیتروژن مایع انجام میشود.
بلورنگاری الکترونی (به انگلیسی: Electron crystallography) روشی برای تعیین آرایش اتمها در جامدات به وسیله میکروسکوپ الکترونی است. این روش میتواند مکملی برای بلورنگاری پرتو-ایکس روی پروتئینهایی (مانند پروتئینهای غشائی) که به راحتی نمیتوانند کریستال سهبعدی لازم برای این کار را تشکیل بدهند، دانست.
بانک داده پروتئین (به انگلیسی: Protein Data Bank) (به اختصار PDB) منبعی برای دادههای ساختار سهبعدی پروتئینها و اسیدهای نوکلئیک است. این دادهها عموماً توسط بلورنگاری پرتو-ایکس یا بینابنمایی انامآر به دست میآیند و توسط زیستشناسها یا زیستشیمیپیشهها از سراسر دنیا برای دسترس عموم آنجا گذاشته میشوند.
مقدار اسید آمینه ضروری و قابلیت دسترسی ان کیفیتپروتعین را مشخص میکند تخم مرغ باکیفیتترین پروتئین رادارد و ارزش بیولوژیکآن ۱۰۰است پروتئین سیبزمینی کم ولی باکیفیت و معادل تخم مرغ است
دونوع رشته پروتیینی دربافت پیوندی وجود دارد رشتههای کلاژن وکشسان هستند رشتههای کلاژن باعث افزایش مقاومت بافت میشوند
سفیده تخم مرغ[ویرایش]
زرده تخم مرغ[ویرایش]
لیوتین و فسویتین لیپوپروتئینها
خالص سازی پروتئینها[ویرایش]
خالص سازی پروتئین شامل یک سری مراحل میباشد که برای مجزا کردن یک نوع پروتئین از پروتئینهای مختلط استفاده میشود. خالص سازی امری حیاتی برای توصیف وظیفه، ساختار و فعل و انفعالات پروتئین مورد نظر میباشد. این کار معمولاً با یک بافت زیستی یا کشت میکروبی آغاز میشود. مولکولها از یاخته جدا شده و سپس پروتئینها از دیگر مولکولهای یاختهای جدا میشوند. در انتها پروتئین مورد نظر از دیگر پروتئینها جدا میشود.
از اطلاعات موجود در دیانای برای ساختن پروتئینها استفاده میشود، اما جایگاه دیانای در هسته و جایگاه پروتئینسازی در سیتوپلاسم است. اندازهگیریها نشان دادهاند که در یاختههایی که در آنها فعالیت پروتئینسازی چندان شدید نیست، مقدار آرانای نیز کم است. از طرف دیگر، آرانای هم در هسته یافت میشود و هم در سیتوپلاسم. بر این اساس دانشمندان به این نتیجه رسیدند که آرانای اطلاعات را از دیانای به ریبوزومها حمل میکند. به این نوع آرانای که اطلاعات را از دیانای به ریبوزومها حمل میکند، آرانای پیک یا پیامبر(mRNA) میگویند. نوعی دیگر آرانای ناقل (tRNA) است که اسیدهای آمینه را به ریبوزوم منتقل میکند، تا ریبوزوم اسیدهای آمینه را بر اساس اطلاعات موجود در mRNA کنار یکدیگر ردیف کند. نوع دیگر آرانای ریبوزومی (rRNA) است که در ساختار ریبوزومها شرکت دارد.
برای ساخت پروتئین در یاخته مراحل زیر باید انجام شود:
ساخته شدن mRNA از روی DNA را رونویسی میگویند که با کمک آنزیم آرانای پلیمراز (RNA polymerase) انجام میشود. سلولهای پروکاریوتی فقط یک نوع آنزیم RNA پلیمراز دارند. در سلولهای یوکاریوتی سه نوع آنزیم RNA پلیمراز یافت شدهاست که آنها را با علامتهای I و II و III مشخص میکنند.
اطلاعات در دیانای بصورت رمز ۳ تایی وجود دارد یعنی هر ۳ نوکلئوتید معرف ۱ رمز و هر رمز معرف ۱ اسید آمینهاست. پس از رونویسی mRNA از هسته خارج میشود و در سیتوپلاسم به کمک نوع دیگر آرانای به نام تیآرانای (tRNA) اسید آمینه را به هم متصل میکند. tRNA روی mRNA متصل میشود و طبق رمزهای tRNA, mRNA اسید آمینهها را کنار هم میگذارد؛ و در آخر زنجیرهٔ بسپپتیدی به وجود میآید. به این مرحله ترجمه پروتئین گفته میشود.
تغییرات پس از ترجمه[ویرایش]
گاه پس از تولید پروتئین بر اثر فعالیت سایر آنزیمها با ایجاد یا شکستن پیوندها تغییراتی در پروتئین ساخته شده صورت میگیرد.
پروتئینهای بدن انسان[ویرایش]
پروتئینهای بدن انسان به سه گروه اصلی پروتئینهای غشایی (غشای سلول)، پروتئینهای حلقوی و پروتئینهای ساختاری یا فیبروز (مانند کلاژن، کراتین و الاستین) تقسیم میشوند. پروتئینهای حلقوی شامل دو گروه اصلی گلوبینها و آلبومینها هستند. گلوبینها مانند هموگلوبین، میوگلوبین و گلوبولینها.
سه پروتئین اصلی خون عبارتند از گلوبولینها، آلبومینها و فیبرینوژن.
کارکردهای سلولی پروتئینها[ویرایش]
رفتار سلولی و تمام فعالیتهایی که در سلول انجام میشود بر عهده پروتئینها است. همه پروتئینها با هم برهمکنش دارند و تقریباً میتوان گفت که همه پروتئینها اثر خود را با همکاری پروتئینهای دیگر در سلول اعمال میکنند و هیچ پروتئینی نیست که در یاخته به تنهایی عمل کند.
زیمایه یا آنزیم یک ماده آلی است که یک فرایند شیمیایی را در یک سازواره یا موجود زنده تقویت یا تضعیف میکند ولی خودش دگرگون نمیشود. به عبارت دیگر آنزیمها کاتالیزگرهای فرایندهای زیستی هستند و نسبت به کاتالیزگرهای غیر زیستی کارایی بسیار بالایی دارند. اغلب آنزیمها ساختار پروتئینی دارند، به غیر از انواع محدودی از آنها که از جنس ریبونوکلئیک اسید هستند؛ مانند ریبوزیمها.
پادتَن یا آنتیبادی پروتئینی است که دستگاه ایمنی بدن از آن استفاده میکند تا اجسام بیگانه همچون باکتری و ویروس را پیدا کرده و خنثی سازد. هر پادتن یک پادگن ویژه را در هدف خود تشخیص میدهد. پادتنها در ایمنی هومورال دفاع اختصاصی توسط پلاسموسیتها تشکیل میشوند.
علامت دهی سلولی[ویرایش]
سلولها به یکدیگر پیامهایی میدهند (بهصورت شیمیایی یا الکتریکی) که بهواسطهٔ این پیامها با هم صحبت کرده و ارتباط برقرار مینمایند و اعمال خود را هماهنگ میکنند. از معروفترین پیامرسانهای شیمیایی «هورمون»ها هستند. هورمون مادهای شیمیایی است که در غدد درونریز ساخته شده و به داخل جریان خون میریزد. این ماده روی سلولهای هدف گیرنده دارد و با نشستن روی آن اعمال سلول را تغییر میدهد. گیرندههای هورمونهای امینو اسیدی در روی سلولهای هدف قرار دارد. هورمونها گاهی از یک غده در یک نقطه از بدن ترشح میشوند و اثر خود را در نقطهای دورتر اعمال میکنند. هورمونها و پیامرسانهای شیمیایی به دستههای مختلفی تقسیم میشوند. برخی از هورمونها توانایی عبور از غشای سلولی و ورود به سلول را دارند و برخی دیگر نمیتوانند از غشا عبور کنند. دستهٔ اخیر گیرندههایی در سطح سلول دارند که پس از اتصال به آنها، پیام خود را با واسطهٔ چندین مولکول دیگر به داخل سلول منتقل میکنند. برخی از این واسطهها را «پیامرسان ثانویه» میگویند (ورارسانی پیام). از معروفترین «سیستمهای پیامرسانی ثانویه» سیستم «جیپروتئینها» است. این سیستم در مدار بسیاری از هورمونها دیده میشود.
سلولهای موجودات پرسلولی توسط انواعی از ملکولهای پروتئینی و غیرپروتئینی به یکدیگر چسبیده باقی میمانند. این اتصالهای گوناگون است که سلولهای یک بافت را در کنار هم و بافتهای مجاور را در کنار هم نگهمیدارد. این پروتئینها در سازمان بندی سلول نقش دارند مثل: اکتین و میوزین
پروتئین و بیماریها[ویرایش]
در سطح مولکولی، کلیه مکانیسمهای زیستی سلولها توسط پروتئینها انجام میشود. پروتئینها با ارتباط با یکدیگر بطور دقیق و بسیار کنترل شدهای وظایف خود را انجام میدهند. اساس مولکولی اغلب بیماریها، بروز نقص یا تداخل در این کارکرد عادی پروتئینها، که از طریق آن مکانیسمهای زیستی سلولی را انجام میدهند، میباشد. اگر کار پروتئینها از حالت طبیعی خارج شود میتوانند باعث بروز بیماریهای مختلف شوند. از جمله این بیماریها سرطان است.
پریون یکی از پروتئینهایی است که بطور عادی در سلولهای عصبی بیان میشود. جهش در این پروتئین میتواند باعث تغییر ساختار این پروتئین شده بطوری که پروتئین جهش یافته میتواند مجتمع شده و پلاکهای پروتئینی را در سلولهای عصبی ایجاد کند.
پروتئینها در رژیم غذایی[ویرایش]
مقاله اصلی پروتئینها در رژیم غذایی
در ژانویه ۲۰۱۵ (بهمن ۱۳۹۳) دانشمندان آمریکایی و استرالیایی موفق شدند با استفاده از اوره و نوعی همزن مخصوص، تخم مرغ آبپز را دوباره به تخم مرغ خام تبدیل کنند. برای این کار ابتدا با استفاده از اوره سفیده جامد و پخته تخم مرغ را تبدیل به مایع کردند، اما هنوز رشتههای پروتئین به نحوی نامطلوب در هم پیچیده بودند. برای رفع این مشکل دانشمندان با یک همزن مخصوص که جریان گردابی ایجاد میکرد بتدریج رشتههای پروتئین را از هم باز و به آرامی جدا کردند تا اینکه دوباره در ساختاری مناسب تا بخورند. بازیافت پروتئین کاری گرانقیمت است و حدود چهار روز طول میکشد چون در واقع باید عملی مثل دیالیز، البته در سطح مولکولی، انجام شود اما روش جدید در عرض چند دقیقه به نتیجه میرسد. این کار مثل این است که تای پیراهنی را که بد تا شده باز کنیم، آن را اتو کنیم و چین و چروکهای ناخواسته را از بین ببریم و بعد دوباره آن را تا کنیم.
Proteins (// or //) are large biomolecules, or macromolecules, consisting of one or more long chains of amino acid residues. Proteins perform a vast array of functions within organisms, including catalysing metabolic reactions, DNA replication, responding to stimuli, and transporting molecules from one location to another. Proteins differ from one another primarily in their sequence of amino acids, which is dictated by the nucleotide sequence of their genes, and which usually results in protein folding into a specific three-dimensional structure that determines its activity.
A linear chain of amino acid residues is called a polypeptide. A protein contains at least one long polypeptide. Short polypeptides, containing less than 20–30 residues, are rarely considered to be proteins and are commonly called peptides, or sometimes oligopeptides. The individual amino acid residues are bonded together by peptide bonds and adjacent amino acid residues. The sequence of amino acid residues in a protein is defined by the sequence of a gene, which is encoded in the genetic code. In general, the genetic code specifies 20 standard amino acids; however, in certain organisms the genetic code can include selenocysteine and—in certain archaea—pyrrolysine. Shortly after or even during synthesis, the residues in a protein are often chemically modified by post-translational modification, which alters the physical and chemical properties, folding, stability, activity, and ultimately, the function of the proteins. Sometimes proteins have non-peptide groups attached, which can be called prosthetic groups or cofactors. Proteins can also work together to achieve a particular function, and they often associate to form stable protein complexes.
Once formed, proteins only exist for a certain period of time and are then degraded and recycled by the cell's machinery through the process of protein turnover. A protein's lifespan is measured in terms of its half-life and covers a wide range. They can exist for minutes or years with an average lifespan of 1–2 days in mammalian cells. Abnormal or misfolded proteins are degraded more rapidly either due to being targeted for destruction or due to being unstable.
Like other biological macromolecules such as polysaccharides and nucleic acids, proteins are essential parts of organisms and participate in virtually every process within cells. Many proteins are enzymes that catalyse biochemical reactions and are vital to metabolism. Proteins also have structural or mechanical functions, such as actin and myosin in muscle and the proteins in the cytoskeleton, which form a system of scaffolding that maintains cell shape. Other proteins are important in cell signaling, immune responses, cell adhesion, and the cell cycle. In animals, proteins are needed in the diet to provide the essential amino acids that cannot be synthesized. Digestion breaks the proteins down for use in the metabolism.
Proteins may be purified from other cellular components using a variety of techniques such as ultracentrifugation, precipitation, electrophoresis, and chromatography; the advent of genetic engineering has made possible a number of methods to facilitate purification. Methods commonly used to study protein structure and function include immunohistochemistry, site-directed mutagenesis, X-ray crystallography, nuclear magnetic resonance and mass spectrometry.
Most proteins consist of linear polymers built from series of up to 20 different L-α-amino acids. All proteinogenic amino acids possess common structural features, including an α-carbon to which an amino group, a carboxyl group, and a variable side chain are bonded. Only proline differs from this basic structure as it contains an unusual ring to the N-end amine group, which forces the CO–NH amide moiety into a fixed conformation. The side chains of the standard amino acids, detailed in the list of standard amino acids, have a great variety of chemical structures and properties; it is the combined effect of all of the amino acid side chains in a protein that ultimately determines its three-dimensional structure and its chemical reactivity. The amino acids in a polypeptide chain are linked by peptide bonds. Once linked in the protein chain, an individual amino acid is called a residue, and the linked series of carbon, nitrogen, and oxygen atoms are known as the main chain or protein backbone.
The peptide bond has two resonance forms that contribute some double-bond character and inhibit rotation around its axis, so that the alpha carbons are roughly coplanar. The other two dihedral angles in the peptide bond determine the local shape assumed by the protein backbone. The end with a free amino group is known as the N-terminus or amino terminus, whereas the end of the protein with a free carboxyl group is known as the C-terminus or carboxy terminus (the sequence of the protein is written from N-terminus to C-terminus, from left to right).
The words protein, polypeptide, and peptide are a little ambiguous and can overlap in meaning. Protein is generally used to refer to the complete biological molecule in a stable conformation, whereas peptide is generally reserved for a short amino acid oligomers often lacking a stable three-dimensional structure. However, the boundary between the two is not well defined and usually lies near 20–30 residues. Polypeptide can refer to any single linear chain of amino acids, usually regardless of length, but often implies an absence of a defined conformation.
Abundance in cells
It has been estimated that average-sized bacteria contain about 2 million proteins per cell (e.g. E. coli and Staphylococcus aureus). Smaller bacteria, such as Mycoplasma or spirochetes contain fewer molecules, on the order of 50,000 to 1 million. By contrast, eukaryotic cells are larger and thus contain much more protein. For instance, yeast cells have been estimated to contain about 50 million proteins and human cells on the order of 1 to 3 billion. The concentration of individual protein copies ranges from a few molecules per cell up to 20 million. Not all genes coding proteins are expressed in most cells and their number depends on, for example, cell type and external stimuli. For instance, of the 20,000 or so proteins encoded by the human genome, only 6,000 are detected in lymphoblastoid cells. Moreover, the number of proteins the genome encodes correlates well with the organism complexity. Eukaryotes, bacteria, archaea and viruses have on average 15145, 3200, 2358 and 42 proteins respectively coded in their genomes.
Proteins are assembled from amino acids using information encoded in genes. Each protein has its own unique amino acid sequence that is specified by the nucleotide sequence of the gene encoding this protein. The genetic code is a set of three-nucleotide sets called codons and each three-nucleotide combination designates an amino acid, for example AUG (adenine-uracil-guanine) is the code for methionine. Because DNA contains four nucleotides, the total number of possible codons is 64; hence, there is some redundancy in the genetic code, with some amino acids specified by more than one codon. Genes encoded in DNA are first transcribed into pre-messenger RNA (mRNA) by proteins such as RNA polymerase. Most organisms then process the pre-mRNA (also known as a primary transcript) using various forms of Post-transcriptional modification to form the mature mRNA, which is then used as a template for protein synthesis by the ribosome. In prokaryotes the mRNA may either be used as soon as it is produced, or be bound by a ribosome after having moved away from the nucleoid. In contrast, eukaryotes make mRNA in the cell nucleus and then translocate it across the nuclear membrane into the cytoplasm, where protein synthesis then takes place. The rate of protein synthesis is higher in prokaryotes than eukaryotes and can reach up to 20 amino acids per second.
The process of synthesizing a protein from an mRNA template is known as translation. The mRNA is loaded onto the ribosome and is read three nucleotides at a time by matching each codon to its base pairing anticodon located on a transfer RNA molecule, which carries the amino acid corresponding to the codon it recognizes. The enzyme aminoacyl tRNA synthetase "charges" the tRNA molecules with the correct amino acids. The growing polypeptide is often termed the nascent chain. Proteins are always biosynthesized from N-terminus to C-terminus.
The size of a synthesized protein can be measured by the number of amino acids it contains and by its total molecular mass, which is normally reported in units of daltons (synonymous with atomic mass units), or the derivative unit kilodalton (kDa). The average size of a protein increases from Archaea to Bacteria to Eukaryote (283, 311, 438 residues and 31, 34, 49 kDa respecitvely) due to a bigger number of protein domains constituting proteins in higher organisms. For instance, yeast proteins are on average 466 amino acids long and 53 kDa in mass. The largest known proteins are the titins, a component of the muscle sarcomere, with a molecular mass of almost 3,000 kDa and a total length of almost 27,000 amino acids.
Short proteins can also be synthesized chemically by a family of methods known as peptide synthesis, which rely on organic synthesis techniques such as chemical ligation to produce peptides in high yield. Chemical synthesis allows for the introduction of non-natural amino acids into polypeptide chains, such as attachment of fluorescent probes to amino acid side chains. These methods are useful in laboratory biochemistry and cell biology, though generally not for commercial applications. Chemical synthesis is inefficient for polypeptides longer than about 300 amino acids, and the synthesized proteins may not readily assume their native tertiary structure. Most chemical synthesis methods proceed from C-terminus to N-terminus, opposite the biological reaction.
Most proteins fold into unique 3-dimensional structures. The shape into which a protein naturally folds is known as its native conformation. Although many proteins can fold unassisted, simply through the chemical properties of their amino acids, others require the aid of molecular chaperones to fold into their native states. Biochemists often refer to four distinct aspects of a protein's structure:
Proteins are not entirely rigid molecules. In addition to these levels of structure, proteins may shift between several related structures while they perform their functions. In the context of these functional rearrangements, these tertiary or quaternary structures are usually referred to as "conformations", and transitions between them are called conformational changes. Such changes are often induced by the binding of a substrate molecule to an enzyme's active site, or the physical region of the protein that participates in chemical catalysis. In solution proteins also undergo variation in structure through thermal vibration and the collision with other molecules.
Proteins can be informally divided into three main classes, which correlate with typical tertiary structures: globular proteins, fibrous proteins, and membrane proteins. Almost all globular proteins are soluble and many are enzymes. Fibrous proteins are often structural, such as collagen, the major component of connective tissue, or keratin, the protein component of hair and nails. Membrane proteins often serve as receptors or provide channels for polar or charged molecules to pass through the cell membrane.
Many proteins are composed of several protein domains, i.e. segments of a protein that fold into distinct structural units. Domains usually also have specific functions, such as enzymatic activities (e.g. kinase) or they serve as binding modules (e.g. the SH3 domain binds to proline-rich sequences in other proteins).
Short amino acid sequences within proteins often act as recognition sites for other proteins. For instance, SH3 domains typically bind to short PxxP motifs (i.e. 2 prolines [P], separated by 2 unspecified amino acids [x], although the surrounding amino acids may determine the exact binding specificity). A large number of such motifs has been collected in the Eukaryotic Linear Motif (ELM) database.
Proteins are the chief actors within the cell, said to be carrying out the duties specified by the information encoded in genes. With the exception of certain types of RNA, most other biological molecules are relatively inert elements upon which proteins act. Proteins make up half the dry weight of an Escherichia coli cell, whereas other macromolecules such as DNA and RNA make up only 3% and 20%, respectively. The set of proteins expressed in a particular cell or cell type is known as its proteome.
The chief characteristic of proteins that also allows their diverse set of functions is their ability to bind other molecules specifically and tightly. The region of the protein responsible for binding another molecule is known as the binding site and is often a depression or "pocket" on the molecular surface. This binding ability is mediated by the tertiary structure of the protein, which defines the binding site pocket, and by the chemical properties of the surrounding amino acids' side chains. Protein binding can be extraordinarily tight and specific; for example, the ribonuclease inhibitor protein binds to human angiogenin with a sub-femtomolar dissociation constant (<10−15 M) but does not bind at all to its amphibian homolog onconase (>1 M). Extremely minor chemical changes such as the addition of a single methyl group to a binding partner can sometimes suffice to nearly eliminate binding; for example, the aminoacyl tRNA synthetase specific to the amino acid valine discriminates against the very similar side chain of the amino acid isoleucine.
Proteins can bind to other proteins as well as to small-molecule substrates. When proteins bind specifically to other copies of the same molecule, they can oligomerize to form fibrils; this process occurs often in structural proteins that consist of globular monomers that self-associate to form rigid fibers. Protein–protein interactions also regulate enzymatic activity, control progression through the cell cycle, and allow the assembly of large protein complexes that carry out many closely related reactions with a common biological function. Proteins can also bind to, or even be integrated into, cell membranes. The ability of binding partners to induce conformational changes in proteins allows the construction of enormously complex signaling networks. As interactions between proteins are reversible, and depend heavily on the availability of different groups of partner proteins to form aggregates that are capable to carry out discrete sets of function, study of the interactions between specific proteins is a key to understand important aspects of cellular function, and ultimately the properties that distinguish particular cell types.
The best-known role of proteins in the cell is as enzymes, which catalyse chemical reactions. Enzymes are usually highly specific and accelerate only one or a few chemical reactions. Enzymes carry out most of the reactions involved in metabolism, as well as manipulating DNA in processes such as DNA replication, DNA repair, and transcription. Some enzymes act on other proteins to add or remove chemical groups in a process known as posttranslational modification. About 4,000 reactions are known to be catalysed by enzymes. The rate acceleration conferred by enzymatic catalysis is often enormous—as much as 1017-fold increase in rate over the uncatalysed reaction in the case of orotate decarboxylase (78 million years without the enzyme, 18 milliseconds with the enzyme).
The molecules bound and acted upon by enzymes are called substrates. Although enzymes can consist of hundreds of amino acids, it is usually only a small fraction of the residues that come in contact with the substrate, and an even smaller fraction—three to four residues on average—that are directly involved in catalysis. The region of the enzyme that binds the substrate and contains the catalytic residues is known as the active site.
Cell signaling and ligand binding
Many proteins are involved in the process of cell signaling and signal transduction. Some proteins, such as insulin, are extracellular proteins that transmit a signal from the cell in which they were synthesized to other cells in distant tissues. Others are membrane proteins that act as receptors whose main function is to bind a signaling molecule and induce a biochemical response in the cell. Many receptors have a binding site exposed on the cell surface and an effector domain within the cell, which may have enzymatic activity or may undergo a conformational change detected by other proteins within the cell.
Antibodies are protein components of an adaptive immune system whose main function is to bind antigens, or foreign substances in the body, and target them for destruction. Antibodies can be secreted into the extracellular environment or anchored in the membranes of specialized B cells known as plasma cells. Whereas enzymes are limited in their binding affinity for their substrates by the necessity of conducting their reaction, antibodies have no such constraints. An antibody's binding affinity to its target is extraordinarily high.
Many ligand transport proteins bind particular small biomolecules and transport them to other locations in the body of a multicellular organism. These proteins must have a high binding affinity when their ligand is present in high concentrations, but must also release the ligand when it is present at low concentrations in the target tissues. The canonical example of a ligand-binding protein is haemoglobin, which transports oxygen from the lungs to other organs and tissues in all vertebrates and has close homologs in every biological kingdom. Lectins are sugar-binding proteins which are highly specific for their sugar moieties. Lectins typically play a role in biological recognition phenomena involving cells and proteins. Receptors and hormones are highly specific binding proteins.
Transmembrane proteins can also serve as ligand transport proteins that alter the permeability of the cell membrane to small molecules and ions. The membrane alone has a hydrophobic core through which polar or charged molecules cannot diffuse. Membrane proteins contain internal channels that allow such molecules to enter and exit the cell. Many ion channel proteins are specialized to select for only a particular ion; for example, potassium and sodium channels often discriminate for only one of the two ions.
Structural proteins confer stiffness and rigidity to otherwise-fluid biological components. Most structural proteins are fibrous proteins; for example, collagen and elastin are critical components of connective tissue such as cartilage, and keratin is found in hard or filamentous structures such as hair, nails, feathers, hooves, and some animal shells. Some globular proteins can also play structural functions, for example, actin and tubulin are globular and soluble as monomers, but polymerize to form long, stiff fibers that make up the cytoskeleton, which allows the cell to maintain its shape and size.
Other proteins that serve structural functions are motor proteins such as myosin, kinesin, and dynein, which are capable of generating mechanical forces. These proteins are crucial for cellular motility of single celled organisms and the sperm of many multicellular organisms which reproduce sexually. They also generate the forces exerted by contracting muscles and play essential roles in intracellular transport.
Methods of study
The activities and structures of proteins may be examined in vitro, in vivo, and in silico. In vitro studies of purified proteins in controlled environments are useful for learning how a protein carries out its function: for example, enzyme kinetics studies explore the chemical mechanism of an enzyme's catalytic activity and its relative affinity for various possible substrate molecules. By contrast, in vivo experiments can provide information about the physiological role of a protein in the context of a cell or even a whole organism. In silico studies use computational methods to study proteins.
To perform in vitro analysis, a protein must be purified away from other cellular components. This process usually begins with cell lysis, in which a cell's membrane is disrupted and its internal contents released into a solution known as a crude lysate. The resulting mixture can be purified using ultracentrifugation, which fractionates the various cellular components into fractions containing soluble proteins; membrane lipids and proteins; cellular organelles, and nucleic acids. Precipitation by a method known as salting out can concentrate the proteins from this lysate. Various types of chromatography are then used to isolate the protein or proteins of interest based on properties such as molecular weight, net charge and binding affinity. The level of purification can be monitored using various types of gel electrophoresis if the desired protein's molecular weight and isoelectric point are known, by spectroscopy if the protein has distinguishable spectroscopic features, or by enzyme assays if the protein has enzymatic activity. Additionally, proteins can be isolated according their charge using electrofocusing.
For natural proteins, a series of purification steps may be necessary to obtain protein sufficiently pure for laboratory applications. To simplify this process, genetic engineering is often used to add chemical features to proteins that make them easier to purify without affecting their structure or activity. Here, a "tag" consisting of a specific amino acid sequence, often a series of histidine residues (a "His-tag"), is attached to one terminus of the protein. As a result, when the lysate is passed over a chromatography column containing nickel, the histidine residues ligate the nickel and attach to the column while the untagged components of the lysate pass unimpeded. A number of different tags have been developed to help researchers purify specific proteins from complex mixtures.
The study of proteins in vivo is often concerned with the synthesis and localization of the protein within the cell. Although many intracellular proteins are synthesized in the cytoplasm and membrane-bound or secreted proteins in the endoplasmic reticulum, the specifics of how proteins are targeted to specific organelles or cellular structures is often unclear. A useful technique for assessing cellular localization uses genetic engineering to express in a cell a fusion protein or chimera consisting of the natural protein of interest linked to a "reporter" such as green fluorescent protein (GFP). The fused protein's position within the cell can be cleanly and efficiently visualized using microscopy, as shown in the figure opposite.
Other methods for elucidating the cellular location of proteins requires the use of known compartmental markers for regions such as the ER, the Golgi, lysosomes or vacuoles, mitochondria, chloroplasts, plasma membrane, etc. With the use of fluorescently tagged versions of these markers or of antibodies to known markers, it becomes much simpler to identify the localization of a protein of interest. For example, indirect immunofluorescence will allow for fluorescence colocalization and demonstration of location. Fluorescent dyes are used to label cellular compartments for a similar purpose.
Other possibilities exist, as well. For example, immunohistochemistry usually utilizes an antibody to one or more proteins of interest that are conjugated to enzymes yielding either luminescent or chromogenic signals that can be compared between samples, allowing for localization information. Another applicable technique is cofractionation in sucrose (or other material) gradients using isopycnic centrifugation. While this technique does not prove colocalization of a compartment of known density and the protein of interest, it does increase the likelihood, and is more amenable to large-scale studies.
Finally, the gold-standard method of cellular localization is immunoelectron microscopy. This technique also uses an antibody to the protein of interest, along with classical electron microscopy techniques. The sample is prepared for normal electron microscopic examination, and then treated with an antibody to the protein of interest that is conjugated to an extremely electro-dense material, usually gold. This allows for the localization of both ultrastructural details as well as the protein of interest.
Through another genetic engineering application known as site-directed mutagenesis, researchers can alter the protein sequence and hence its structure, cellular localization, and susceptibility to regulation. This technique even allows the incorporation of unnatural amino acids into proteins, using modified tRNAs, and may allow the rational design of new proteins with novel properties.
The total complement of proteins present at a time in a cell or cell type is known as its proteome, and the study of such large-scale data sets defines the field of proteomics, named by analogy to the related field of genomics. Key experimental techniques in proteomics include 2D electrophoresis, which allows the separation of a large number of proteins, mass spectrometry, which allows rapid high-throughput identification of proteins and sequencing of peptides (most often after in-gel digestion), protein microarrays, which allow the detection of the relative levels of a large number of proteins present in a cell, and two-hybrid screening, which allows the systematic exploration of protein–protein interactions. The total complement of biologically possible such interactions is known as the interactome. A systematic attempt to determine the structures of proteins representing every possible fold is known as structural genomics.
A vast array of computational methods have been developed to analyze the structure, function, and evolution of proteins.
The development of such tools has been driven by the large amount of genomic and proteomic data available for a variety of organisms, including the human genome. It is simply impossible to study all proteins experimentally, hence only a few are subjected to laboratory experiments while computational tools are used to extrapolate to similar proteins. Such homologous proteins can be efficiently identified in distantly related organisms by sequence alignment. Genome and gene sequences can be searched by a variety of tools for certain properties. Sequence profiling tools can find restriction enzyme sites, open reading frames in nucleotide sequences, and predict secondary structures. Phylogenetic trees can be constructed and evolutionary hypotheses developed using special software like ClustalW regarding the ancestry of modern organisms and the genes they express. The field of bioinformatics is now indispensable for the analysis of genes and proteins.
Discovering the tertiary structure of a protein, or the quaternary structure of its complexes, can provide important clues about how the protein performs its function. Common experimental methods of structure determination include X-ray crystallography and NMR spectroscopy, both of which can produce information at atomic resolution. However, NMR experiments are able to provide information from which a subset of distances between pairs of atoms can be estimated, and the final possible conformations for a protein are determined by solving a distance geometry problem. Dual polarisation interferometry is a quantitative analytical method for measuring the overall protein conformation and conformational changes due to interactions or other stimulus. Circular dichroism is another laboratory technique for determining internal β-sheet / α-helical composition of proteins. Cryoelectron microscopy is used to produce lower-resolution structural information about very large protein complexes, including assembled viruses; a variant known as electron crystallography can also produce high-resolution information in some cases, especially for two-dimensional crystals of membrane proteins. Solved structures are usually deposited in the Protein Data Bank (PDB), a freely available resource from which structural data about thousands of proteins can be obtained in the form of Cartesian coordinates for each atom in the protein.
Many more gene sequences are known than protein structures. Further, the set of solved structures is biased toward proteins that can be easily subjected to the conditions required in X-ray crystallography, one of the major structure determination methods. In particular, globular proteins are comparatively easy to crystallize in preparation for X-ray crystallography. Membrane proteins, by contrast, are difficult to crystallize and are underrepresented in the PDB. Structural genomics initiatives have attempted to remedy these deficiencies by systematically solving representative structures of major fold classes. Protein structure prediction methods attempt to provide a means of generating a plausible structure for proteins whose structures have not been experimentally determined.
Structure prediction and simulation
Complementary to the field of structural genomics, protein structure prediction develops efficient mathematical models of proteins to computationally predict their structures in theory, instead of detecting structures with laboratory observation. The most successful type of structure prediction, known as homology modeling, relies on the existence of a "template" structure with sequence similarity to the protein being modeled; structural genomics' goal is to provide sufficient representation in solved structures to model most of those that remain. Although producing accurate models remains a challenge when only distantly related template structures are available, it has been suggested that sequence alignment is the bottleneck in this process, as quite accurate models can be produced if a "perfect" sequence alignment is known. Many structure prediction methods have served to inform the emerging field of protein engineering, in which novel protein folds have already been designed. A more complex computational problem is the prediction of intermolecular interactions, such as in molecular docking and protein–protein interaction prediction.
Mathematical models to simulate dynamic processes of protein folding and binding involve molecular mechanics, in particular, molecular dynamics. Monte Carlo techniques facilitate the computations, which exploit advances in parallel and distributed computing (for example, the Folding@home project which performs molecular modeling on GPUs). In silico simulations discovered the folding of small α-helical protein domains such as the villin headpiece and the HIV accessory protein. Hybrid methods combining standard molecular dynamics with quantum mechanical mathematics explored the electronic states of rhodopsins.
Protein disorder and unstructure prediction
Many proteins (in Eucaryota ~33%) contain large unstructured but biologically functional segments and can be classified as intrinsically disordered proteins. Predicting and analysing protein disorder is, therefore, an important part of protein structure characterisation.
Most microorganisms and plants can biosynthesize all 20 standard amino acids, while animals (including humans) must obtain some of the amino acids from the diet. The amino acids that an organism cannot synthesize on its own are referred to as essential amino acids. Key enzymes that synthesize certain amino acids are not present in animals — such as aspartokinase, which catalyses the first step in the synthesis of lysine, methionine, and threonine from aspartate. If amino acids are present in the environment, microorganisms can conserve energy by taking up the amino acids from their surroundings and downregulating their biosynthetic pathways.
In animals, amino acids are obtained through the consumption of foods containing protein. Ingested proteins are then broken down into amino acids through digestion, which typically involves denaturation of the protein through exposure to acid and hydrolysis by enzymes called proteases. Some ingested amino acids are used for protein biosynthesis, while others are converted to glucose through gluconeogenesis, or fed into the citric acid cycle. This use of protein as a fuel is particularly important under starvation conditions as it allows the body's own proteins to be used to support life, particularly those found in muscle.
In animals such as dogs and cats, protein maintains the health and quality of the skin by promoting hair follicle growth and keratinization, and thus reducing the likelihood of skin problems producing malodours. Poor-quality proteins also have a role regarding gastrointestinal health, increasing the potential for flatulence and odorous compounds in dogs because when proteins reach the colon in an undigested state, they are fermented producing hydrogen sulfide gas, indole, and skatole. Dogs and cats digest animal proteins better than those from plants but products of low-quality animal origin are poorly digested, including skin, feathers, and connective tissue.
History and etymology
Proteins were recognized as a distinct class of biological molecules in the eighteenth century by Antoine Fourcroy and others, distinguished by the molecules' ability to coagulate or flocculate under treatments with heat or acid. Noted examples at the time included albumin from egg whites, blood serum albumin, fibrin, and wheat gluten.
Proteins were first described by the Dutch chemist Gerardus Johannes Mulder and named by the Swedish chemist Jöns Jacob Berzelius in 1838. Mulder carried out elemental analysis of common proteins and found that nearly all proteins had the same empirical formula, C400H620N100O120P1S1. He came to the erroneous conclusion that they might be composed of a single type of (very large) molecule. The term "protein" to describe these molecules was proposed by Mulder's associate Berzelius; protein is derived from the Greek word πρώτειος (proteios), meaning "primary", "in the lead", or "standing in front", + -in. Mulder went on to identify the products of protein degradation such as the amino acid leucine for which he found a (nearly correct) molecular weight of 131 Da. Prior to "protein", other names were used, like "albumins" or "albuminous materials" (Eiweisskörper, in German).
Early nutritional scientists such as the German Carl von Voit believed that protein was the most important nutrient for maintaining the structure of the body, because it was generally believed that "flesh makes flesh." Karl Heinrich Ritthausen extended known protein forms with the identification of glutamic acid. At the Connecticut Agricultural Experiment Station a detailed review of the vegetable proteins was compiled by Thomas Burr Osborne. Working with Lafayette Mendel and applying Liebig's law of the minimum in feeding laboratory rats, the nutritionally essential amino acids were established. The work was continued and communicated by William Cumming Rose. The understanding of proteins as polypeptides came through the work of Franz Hofmeister and Hermann Emil Fischer in 1902. The central role of proteins as enzymes in living organisms was not fully appreciated until 1926, when James B. Sumner showed that the enzyme urease was in fact a protein.
The difficulty in purifying proteins in large quantities made them very difficult for early protein biochemists to study. Hence, early studies focused on proteins that could be purified in large quantities, e.g., those of blood, egg white, various toxins, and digestive/metabolic enzymes obtained from slaughterhouses. In the 1950s, the Armour Hot Dog Co. purified 1 kg of pure bovine pancreatic ribonuclease A and made it freely available to scientists; this gesture helped ribonuclease A become a major target for biochemical study for the following decades.
Linus Pauling is credited with the successful prediction of regular protein secondary structures based on hydrogen bonding, an idea first put forth by William Astbury in 1933. Later work by Walter Kauzmann on denaturation, based partly on previous studies by Kaj Linderstrøm-Lang, contributed an understanding of protein folding and structure mediated by hydrophobic interactions.
The first protein to be sequenced was insulin, by Frederick Sanger, in 1949. Sanger correctly determined the amino acid sequence of insulin, thus conclusively demonstrating that proteins consisted of linear polymers of amino acids rather than branched chains, colloids, or cyclols. He won the Nobel Prize for this achievement in 1958.
The first protein structures to be solved were hemoglobin and myoglobin, by Max Perutz and Sir John Cowdery Kendrew, respectively, in 1958. As of 2017[update], the Protein Data Bank has over 126,060 atomic-resolution structures of proteins. In more recent times, cryo-electron microscopy of large macromolecular assemblies and computational protein structure prediction of small protein domains are two methods approaching atomic resolution.
Databases and projects
Tutorials and educational websites