پرتو ایکس (به انگلیسی: X-ray) یا پرتو رونتگن (Röntgen radation)، نوعی از تابش الکترومغناطیسی با طول موج حدود ۰/۰۱ تا ۱۰ نانومتر معادل با ۳۰ پِتاهرتز تا ۳۰ اِگزاهرتز (۱۶ ۱۰×۳ تا ۱۹ ۱۰×۳ هرتز) و انرژی بین ۱۰۰ الکترونولت تا ۱۰۰ کیلوالکترونولت است. طول موج پرتو ایکس از طول موج پرتو فرابنفش پایینتر و از طول موج پرتو گاما بالاتر است. نام دیگر اشعه ایکس، پرتو رونتگن است، که برگرفته از نام ویلهلم رونتگن، کاشف آن است. علت نامگذاری پرتو ایکس از طرف ویلهلم رونتگن نشان دادن کشف یک نوع پرتو ناشناخته بود، است.
به پرتو ایکس با فوتونهای پرانرژیتر (بالای ۵ یا ۱۰ کیلو الکترونولت و با طول موج ۰٫۱ تا ۰٫۲ نانومتر) پرتو ایکس سخت و پرتوهای با انرژی پایینتر را پرتو ایکس نرم میگویند. به دلیل توان نفوذ بالای پرتو ایکس سخت، از آن برای تصویربرداری از داخل اجسام، مانند پرتونگاری از اعضای بدن و همچنین قسمت امنیت فرودگاهها و به عنوان یکی از روشهای تست غیرمخرب در تشخیص نقصهای موجود در اشیا (مثلاً در لولهها و …) استفاده میشود.
از عبارت «پرتو ایکس» علاوه بر روش پرتو نگاری، برای عکسهای پرتو نگاری شده به این روش نیز اطلاق میشود. به دلیل اینکه طول موج پرتو ایکس سخت برابر اندازه اتمها است، از کریستالوگرافی اشعه ایکس برای تعیین ساختار کریستالی استفاده میشود. در مقابل پرتو ایکس نرم به آسانی در هوا جذب میشود؛ عمق نفوذ پرتو ایکس با قدرت ۶۰ الکترونولت در آب کمتر از یک میکرومتر است.
هیچ توافق جامعی برای تمایز بین پرتوهای ایکس و گاما وجود ندارد. یکی از روشهای تعیین تمایز بین این دو پرتو، بررسی منبع آن است؛ پرتو ایکس از الکترونها و پرتو گاما از هسته اتم ساطع میشود. این شیوه از تعریف اشکالات فراوانی دارد؛ در فرایندهای دیگر نیز فوتونهایی با انرژیهای بالا تولید میگردند، یا اینکه روشهای تولیدی وجود دارد که شناخته شده نیستند. تمایز دیگر پرتو گاما و پرتو ایکس، بر اساس طول موج است، پرتوهای دارای طول موجهای پایین، برای مثال ۰٫۱ آنگستروم، در دستهبندی پرتو گاما قرار میگیرند. با این معیار درصورتیکه فقط طول موج مشخص باشد میتوان فوتون را در یک دستهبندی مشخص قرار داد. هرچند برخی روشهای اندازهگیری قادر به تمیز دادن طول موجهای مختلف نیستند، اغلب این دو تعریف با هم منطبقند چراکه پرتوهای الکترومغناطیس ساطع شده از تیوبهای پرتو ایکس دارای طول موج بلندتر و انرژی فوتون پایینتری نسبت به پرتوهای ساطع شده از هستههای پرتوزا هستند. گاهی اوقات، به غیر از این دو تعریف، در زمینهای خاص، تعاریفی بر اساس سوابق تاریخی، تکنیکهای اندازهگیری (تشخیص) یا نوع مصرف آن کاربرد پیدا میکنند. با این حال، پرتو گامای مورد استفاده در امور پزشکی و صنعتی، به عنوان مثال برای پرتو درمانی، دارای طول موج ۶ تا ۲۰ مگاالکترونولت است، که میتوان آن را در دسته پرتو ایکس نیز قرار داد.
فوتونهای پرتو ایکس دارای انرژی لازم برای یونیزه کردن اتمها و شکستن پیوند اتمی هستند. این خاصیت پرتو ایکس را در طبقهبندی پرتوهای یونیزهکننده قرار میدهد، و به همین دلیل برای بافتهای زنده مضر است. قرار گرفتن در معرض دوز تابش در مقادیر بالا در یک دوره زمانی کم باعث ایجاد بیماریهای حاصل از تشعشع میشود، و در عین حال قرار گرفتن در معرض دوز تابش در مقادیر پایین ریسک ابتلا به سرطانهای ناشی از تشعشع را بالا میبرد. در تصویربرداری پزشکی این افزایش خطر ابتلا به سرطان در مقابل فواید استفاده از این روش برای تشخیص پزشکی، قابل چشم پوشی است. از قابلیت یونیزه کردن اشعه ایکس میتوان در درمان سرطان استفاده کرد، که در این روش پرتو درمانی از پرتوایکس برای کشتن سلولهای بدخیم سرطانی استفاده میشود. همچنین ازطیفسنجی پرتو ایکس برای تعیین خصوصیات مواد استفاده میشود.
پرتو ایکس سخت میتواند بدون اینکه جذب یا پراکنده شود از اشیاء ضخیم عبور کند. به همین دلیل از پرتو ایکس سخت برای تصویربرداری از داخل اشیاء دارند استفاده میشود. کاربردهای دیگر آن عبارتند از رادیوگرافی پزشکی و اسکنرهای امنیتی فرودگاهها. در عین حال از تکنیک مشابه در صنعت (برای مثال رادیوگرافی صنعتی و سی تی اسکن صنعتی) و همچنین تحقیقات (برای مثال سی تی حیوانات کوچک) استفاده میشود. عمق نفوذ پرتو ایکس با تغییر فرکانس آن تغییر میکند. این موضوع تنظیم انرژی فوتون برای کاربردهای مختلف را امکانپذیر میکند.
واکنش با مواد[ویرایش]
تأثیر پرتو ایکس بر مواد از سه راه صورت میگیرد؛ اثر فوتوالکتریک، اثر کامپتون و پراکندگی رایلی. شدت هر یک از این تأثیرات بستگی به انرژی پرتو ایکس دارد. به دلیل اینکه انرژی فوتونهای پرتو ایکس از انرژی پیوندهای شیمیایی بالاتر است، خواص شیمایی ماده در آن اثری ندارد. مکانیسم واکنشی غالب در رژیم پرتو ایکس نرم و پرتو ایکس سخت با انرژی پایین، اثر فوتوالکتریک است. برای رده انرژیهای بالا مکانیسم غالب، مکانیسم اثر کامپتون است.
احتمال جذب فوتوالکتریک در واحد جرم با میزان 'Z3/E3 متناسب است، که در آن Z عدد اتمی و E انرژی فوتون هستند. این قانون در لایه درونی انرژی پیوند الکترونها، جاییکه احتمال واکنشها دچار تغییرات ناگهانی میشوند، معتبر نیست، به همین خاطر به آن حد جذب گفته میشود. هر حال، رویه کلی غالب برای فوتونهای کم انرژی و عددهای اتمی بالا، ضریب جذب بالا و عمق نفوذ کم است. در مورد بافتهای نرم تا محدوده انرژی فوتون 26eV پدیده غالب اثر فوتوالکتریک است ولی از این محدوده به بالا اثر کامپتون فعال میشود. برای عناصر با عدد اتمی بالاتر این محدوده بالاتر میرود. میزان بالای کلسیم در استخوانها و آرایش چگال آن باعث میشود، استخوانها در تصاویر رادیوگرافی به وضوح نمایان گردند. فوتون فتوالکتریک انتقال همه انرژی خود را به الکترونی که با آن واکنش میدهد، منتقل میکند، این امر باعث یونیزاسیون اتمی که الکترون به آن متعلق است میشود و یک فوتو الکترون ایجاد میکند که تمایل زیادی به یونیزه کردن اتمهای در سر راه خود دارد. یک الکترون بیرونی جای خالی الکترون را پر میکند و خواص فوتون یا الکترون اوژه را ایجاد میکند. از این آثار میتوان تعیین نوع عناصر توسط روشهای طیفسنجی پرتو ایکس یا طیفسنجی الکترون اوژه استفاده نمود.
اثر کامپتون مکانیسم واکنش غالب بین پرتو ایکس و بافتهای نرم در تصویر برداری پزشکی است. پراکندگی کامپتون، پراکندگی ناکشسان یک فوتون توسط یک ذره بادار و معمولاً الکترون است و باعث کاهش انرژی (کاهش طول موج) فوتون (که ممکن است یک پرتو ایکس یا پرتو گاما باشد) میشود که به اثر کامپتون مشهور است. قسمتی از انرژی فوتون به الکترونهای در حال پراکنش منتقل میشود، در نتیجه اتمها را یونیزه کرده و باعث افزایش طول موج پرتو ایکس میشود. فوتون پراکنش شده در هر مسیری میتواند حرکت کند ولی مسیر اولیه آن مخصوصاً در مورد پرتوهای ایکس با انرژی بالا محتمل تر است. احتمال زوایای مختلف پراکنش توسط فرمول کلاین - نیشینا ( Klein–Nishina formula) محاسبه میشود. انرژی انتقالی مستقیماً از زاویه پراکنش از قانون پایستگی انرژی و تکانه بدست میآید.
هر زمان که ذرات باردار (الکترونها یا یون) با انرژی کافی به مواد برخورد نمایند، اشعه ایکس تولید میشوند.
تولید از طریق الکترونها[ویرایش]
در این روش از تولید پرتو ایکس از تیوب پرتو ایکس استفاده میشود، که این تیوب یک لوله تحت خلأ است که در آن به الکترونها تولیدی توسط یک کاتد داغ شتاب داده شده تا به سرعت بالا برسند. الکترونهای با سرعت بالا پس از برخورد به مانع فلزی که همان آند است، پرتو ایکس را ایجاد مینمایند. در کاربردهای بهداشتی مانع هدف در تیوب معمولاً از جنس تنگستن یا جنس آلیاژ مقاوم به ترک رنیوم (۵٪) و تنگستن (۹۵٪) است، ولی در برخی کاربردهای خاص که به پرتو ایکس نرم نیاز است مانند ماموگرافی از مولیبدن استفاده میشود. در کریستالوگرافی استفاده از مانع هدف مسی بسیار معمول است، و در برخی مواقع که فلورسنت موجود در آهن باعث اشکال میشود از کبالت استفاده میشود. انرژی ماکریموم فوتون پرتو ایکس محدود به انرژی برخورد الکترون است، که برابر است با ولتاژ شارژ شده در تیوب ضرب در بار الکترون، پس در نتیجه یک تیوب 80KV نمیتواند پرتو ایکس با انرژی بالاتر از 80KeV تولید نماید. زمانیکه الکترون به هدف برخورد میکند، پرتو ایکس از طریق دو فرایند اتمی متفاوت ایجاد میشود، که عبارتند از.
هر دو این روشهای تولید دارای راندمان کم نزدیک به یک درصد هستند، و بیشتر انرژی الکتریکی مصرفی تیوب به صورت گرما هدر میرود. زمانیکه فلاکس پرتو ایکس قابل استفادهای تولید میشود باید در نظر داشت، که تیوب پرتو ایکس باید طوری طراحی شود که این گرمای اضافی را پراکندهسازد.
تولید به روش یونهای پرسرعت مثبت[ویرایش]
پرتو ایکس را میتوان با استفاده از پروتونها پر سرعت یا یونهای مثبت دیگر ایجاد نمود. از پرتو ایکس حاصل از تحریک پروتون یا پرتو ایکس حاصل از ذرات تحریک شده بهطور گسترده به عنوان یک روش تحلیل مورد استفاده قرار میگیرند. در انرژیهای بالا، [سطح مقطع] تولید متناسب است با Z12Z2−4 که در آن Z1 عدد اتمی یون و Z2 [عدد اتمی] هدف است.
پرتو ایکس در سال ۱۸۹۵ توسط ویلهلم رونتگن، فیزیکدان آلمانی کشف شد و به دلیل ناشناخته بودن ماهیت آن، پرتو ایکس نامیده شد. یعنی با قرار دادن آن در میدانهای مغناطیس و الکتریکی به هیچ وجه منحرف نمیشود. این پرتو قدرت نفوذ بسیاری دارد و تقریباً از هر چیزی به جز استخوان و فلز (اوربیتال d) میگذرد. اولین عکس پرتو ایکس از دست همسر رونتگن گرفته شد که انگشتر او به خوبی در عکس مشخص است. این گمان که پرتوهای ایکس، امواج الکترومغناطیس با طول موج بسیار کوتاه هستند، به کمک یک آزمایش پراش دوگانه که در سال ۱۹۰۶ توسط سی.گ. بارکلا انجام گرفت، تأیید شد.
اثبات قطعی ماهیت موجی پرتو ایکس در سال ۱۹۱۲ به وسیلهٔ فون لاوه ارائه شد.
وی اولین جایزه فیزیک نوبل را در سال ۱۹۰۱ گرفت.
انواع پرتو ایکس[ویرایش]
در هنگام برخورد الکترونهای با سرعت بالا به فلزات، الکترونهای لایههای پایینتر به لایههای بالاتر منتقل شده (اتمها برانگیخته میشوند) و در هنگام برگشت الکترونها به حالت پایه انرژی مازاد را به صورت پرتو ایکس گسیل میکنند؛ بنابراین هر لامپ تولید پرتو ایکس باید شامل:
باشد. به علاوه از آنجایی که قسمت عمدهٔ انرژی جنبشی الکترونها هنگام برخورد به فلز هدف، به حرارت تبدیل میشود، معمولاً فلز هدف را با آب خنک میکنند تا ذوب نشود.
این لامپها همانند لامپ پرتو ایکس اولیهای هستند که رونتگن ساخته بود و امروزه چندان کاربردی ندارند. در این لامپها الکترون از یونش مقدار اندکی گاز موجود در لامپ تقریباً تخلیه شده به وجود میآید.
پرتو ایکس برای انسان بسیار خطرناک است و میتواند آسیبهای زیستی قابل توجهی را پدید آورد. این آسیبها در انسان شامل سوختگی، بیماری ناشی از دریافت تابش بیش از حد و اثرات ژنتیکی هستند.
پیوندهای مفید به بیرون[ویرایش]
پیوند به بیرون[ویرایش]
دو گونه پرتوافشانی وجود دارد؛ یونساز و غیر یونساز. واژهٔ پرتو (Ray) بیشتر برای گونه یونساز آن بهکار میرود (که انرژی کافی برای یونیزه کردن اتمها را دارند)، اما گاهی ممکن است برای گونه غیر یونساز آن نیز بهکار رود که دراینصورت معمولاً به آن موج میگویند (مانند نور و امواج رادیویی).
پرتو غیر یونساز[ویرایش]
پرتو با انرژی کافی میتواند اتمها را یونیزه کند. از آنجا که یاخته از اتم ساخته شده یونیزه شدن میتواند سبب سرطان شود. هر یاخته (سلول) انسان از هزاران میلیون اتم ساخته شده و احتمال ابتلا به سرطان از راه تابش به میزان تابش و میزان حساسیت فرد بستگی دارد.
پرتو بتا (+/-)[ویرایش]
هر ذره بتا متشکل از ۱عدد الکترون است.
مشارکتکنندگان ویکیپدیا. «دانشنامهٔ ویکیپدیای انگلیسی، بازبینیشده در ۲۲ شهریور ۱۳۸۹.». در
X-rays make up X-radiation, a form of high-energy electromagnetic radiation. Most X-rays have a wavelength ranging from 0.03 to 3 nanometres, corresponding to frequencies in the range 30 petahertz to 30 exahertz (3×1016 Hz to 3×1019 Hz) and energies in the range 100 eV to 200 keV. X-ray wavelengths are shorter than those of UV rays and typically longer than those of gamma rays. In many languages, X-radiation is referred to as Röntgen radiation, after the German scientist Wilhelm Röntgen, who discovered it on November 8, 1895. He named it X-radiation to signify an unknown type of radiation. Spelling of X-ray(s) in the English language includes the variants x-ray(s), xray(s), and X ray(s).
Pre-Röntgen observations and research
Before their discovery in 1895, X-rays were just a type of unidentified radiation emanating from experimental discharge tubes. They were noticed by scientists investigating cathode rays produced by such tubes, which are energetic electron beams that were first observed in 1869. Many of the early Crookes tubes (invented around 1875) undoubtedly radiated X-rays, because early researchers noticed effects that were attributable to them, as detailed below. Crookes tubes created free electrons by ionization of the residual air in the tube by a high DC voltage of anywhere between a few kilovolts and 100 kV. This voltage accelerated the electrons coming from the cathode to a high enough velocity that they created X-rays when they struck the anode or the glass wall of the tube.
The earliest experimenter thought to have (unknowingly) produced X-rays was actuary William Morgan. In 1785 he presented a paper to the Royal Society of London describing the effects of passing electrical currents through a partially evacuated glass tube, producing a glow created by X-rays. This work was further explored by Humphry Davy and his assistant Michael Faraday.
When Stanford University physics professor Fernando Sanford created his "electric photography" he also unknowingly generated and detected X-rays. From 1886 to 1888 he had studied in the Hermann Helmholtz laboratory in Berlin, where he became familiar with the cathode rays generated in vacuum tubes when a voltage was applied across separate electrodes, as previously studied by Heinrich Hertz and Philipp Lenard. His letter of January 6, 1893 (describing his discovery as "electric photography") to The Physical Review was duly published and an article entitled Without Lens or Light, Photographs Taken With Plate and Object in Darkness appeared in the San Francisco Examiner.
Starting in 1888, Philipp Lenard conducted experiments to see whether cathode rays could pass out of the Crookes tube into the air. He built a Crookes tube with a "window" in the end made of thin aluminum, facing the cathode so the cathode rays would strike it (later called a "Lenard tube"). He found that something came through, that would expose photographic plates and cause fluorescence. He measured the penetrating power of these rays through various materials. It has been suggested that at least some of these "Lenard rays" were actually X-rays.
In 1889 Ukrainian-born Ivan Pulyui, a lecturer in experimental physics at the Prague Polytechnic who since 1877 had been constructing various designs of gas-filled tubes to investigate their properties, published a paper on how sealed photographic plates became dark when exposed to the emanations from the tubes.
Hermann von Helmholtz formulated mathematical equations for X-rays. He postulated a dispersion theory before Röntgen made his discovery and announcement. It was formed on the basis of the electromagnetic theory of light. However, he did not work with actual X-rays.
In 1894 Nikola Tesla noticed damaged film in his lab that seemed to be associated with Crookes tube experiments and began investigating this radiant energy of "invisible" kinds. After Röntgen identified the X-ray, Tesla began making X-ray images of his own using high voltages and tubes of his own design, as well as Crookes tubes.
Discovery by Röntgen
On November 8, 1895, German physics professor Wilhelm Röntgen stumbled on X-rays while experimenting with Lenard tubes and Crookes tubes and began studying them. He wrote an initial report "On a new kind of ray: A preliminary communication" and on December 28, 1895 submitted it to Würzburg's Physical-Medical Society journal. This was the first paper written on X-rays. Röntgen referred to the radiation as "X", to indicate that it was an unknown type of radiation. The name stuck, although (over Röntgen's great objections) many of his colleagues suggested calling them Röntgen rays. They are still referred to as such in many languages, including German, Hungarian, Danish, Polish, Bulgarian, Swedish, Finnish, Estonian, Russian, Japanese, Dutch, Georgian, Hebrew and Norwegian. Röntgen received the first Nobel Prize in Physics for his discovery.
There are conflicting accounts of his discovery because Röntgen had his lab notes burned after his death, but this is a likely reconstruction by his biographers: Röntgen was investigating cathode rays from a Crookes tube which he had wrapped in black cardboard so that the visible light from the tube would not interfere, using a fluorescent screen painted with barium platinocyanide. He noticed a faint green glow from the screen, about 1 meter away. Röntgen realized some invisible rays coming from the tube were passing through the cardboard to make the screen glow. He found they could also pass through books and papers on his desk. Röntgen threw himself into investigating these unknown rays systematically. Two months after his initial discovery, he published his paper.
Röntgen discovered their medical use when he made a picture of his wife's hand on a photographic plate formed due to X-rays. The photograph of his wife's hand was the first photograph of a human body part using X-rays. When she saw the picture, she said "I have seen my death."
The discovery of X-rays stimulated a veritable sensation. Röntgen's biographer Otto Glasser estimated that, in 1896 alone, as many as 49 essays and 1044 articles about the new rays were published. This was probably a conservative estimate, if one considers that nearly every paper around the world extensively reported about the new discovery, with a magazine such as Science dedicating as many as 23 articles to it in that year alone. Sensationalist reactions to the new discovery included publications linking the new kind of rays to occult and paranormal theories, such as telepathy.
Advances in radiology
Röntgen immediately noticed X-rays could have medical applications. Along with his 28 December Physical-Medical Society submission he sent a letter to physicians he knew around Europe (January 1, 1896). News (and the creation of "shadowgrams") spread rapidly with Scottish electrical engineer Alan Archibald Campbell-Swinton being the first after Röntgen to create an X-ray (of a hand). Through February there were 46 experimenters taking up the technique in North America alone.
The first use of X-rays under clinical conditions was by John Hall-Edwards in Birmingham, England on 11 January 1896, when he radiographed a needle stuck in the hand of an associate. On February 14, 1896 Hall-Edwards was also the first to use X-rays in a surgical operation. In early 1896, several weeks after Röntgen's discovery, Ivan Romanovich Tarkhanov irradiated frogs and insects with X-rays, concluding that the rays "not only photograph, but also affect the living function".
The first medical X-ray made in the United States was obtained using a discharge tube of Pulyui's design. In January 1896, on reading of Röntgen's discovery, Frank Austin of Dartmouth College tested all of the discharge tubes in the physics laboratory and found that only the Pulyui tube produced X-rays. This was a result of Pulyui's inclusion of an oblique "target" of mica, used for holding samples of fluorescent material, within the tube. On 3 February 1896 Gilman Frost, professor of medicine at the college, and his brother Edwin Frost, professor of physics, exposed the wrist of Eddie McCarthy, whom Gilman had treated some weeks earlier for a fracture, to the X-rays and collected the resulting image of the broken bone on gelatin photographic plates obtained from Howard Langill, a local photographer also interested in Röntgen's work.
Many experimenters, including Röntgen himself in his original experiments, came up with methods to view X-ray images "live" using some form of luminescent screen. Röntgen used a screen coated with barium platinocyanide. On February 5, 1896 live imaging devices were developed by both Italian scientist Enrico Salvioni (his "cryptoscope") and Professor McGie of Princeton University (his "Skiascope"), both using barium platinocyanide. American inventor Thomas Edison started research soon after Röntgen's discovery and investigated materials' ability to fluoresce when exposed to X-rays, finding that calcium tungstate was the most effective substance. In May 1896 he developed the first mass-produced live imaging device, his "Vitascope", later called the fluoroscope, which became the standard for medical X-ray examinations. Edison dropped X-ray research around 1903, before the death of Clarence Madison Dally, one of his glassblowers. Dally had a habit of testing X-ray tubes on his own hands, developing a cancer in them so tenacious that both arms were amputated in a futile attempt to save his life; in 1904, he became the first known death attributed to X-ray exposure. During the time the fluoroscope was being developed, Serbian American physicist Mihajlo Pupin, using a calcium tungstate screen developed by Edison, found that using a fluorescent screen decreased the exposure time it took to create a X-ray for medical imaging from an hour to a few minutes.
In 1901, U.S. President William McKinley was shot twice in an assassination attempt. While one bullet only grazed his sternum, another had lodged somewhere deep inside his abdomen and could not be found. A worried McKinley aide sent word to inventor Thomas Edison to rush an X-ray machine to Buffalo to find the stray bullet. It arrived but was not used. While the shooting itself had not been lethal, gangrene had developed along the path of the bullet, and McKinley died of septic shock due to bacterial infection six days later.
With the widespread experimentation with x‑rays after their discovery in 1895 by scientists, physicians, and inventors came many stories of burns, hair loss, and worse in technical journals of the time. In February 1896, Professor John Daniel and Dr. William Lofland Dudley of Vanderbilt University reported hair loss after Dr. Dudley was X-rayed. A child who had been shot in the head was brought to the Vanderbilt laboratory in 1896. Before trying to find the bullet an experiment was attempted, for which Dudley "with his characteristic devotion to science" volunteered. Daniel reported that 21 days after taking a picture of Dudley's skull (with an exposure time of one hour), he noticed a bald spot 2 inches (5.1 cm) in diameter on the part of his head nearest the X-ray tube: "A plate holder with the plates towards the side of the skull was fastened and a coin placed between the skull and the head. The tube was fastened at the other side at a distance of one-half inch from the hair."
In August 1896 Dr. HD. Hawks, a graduate of Columbia College, suffered severe hand and chest burns from an x-ray demonstration. It was reported in Electrical Review and led to many other reports of problems associated with x-rays being sent in to the publication. Many experimenters including Elihu Thomson at Edison's lab, William J. Morton, and Nikola Tesla also reported burns. Elihu Thomson deliberately exposed a finger to an x-ray tube over a period of time and suffered pain, swelling, and blistering. Other effects were sometimes blamed for the damage including ultraviolet rays and (according to Tesla) ozone. Many physicians claimed there were no effects from X-ray exposure at all. On August 3, 1905 at San Francisco, California, Elizabeth Fleischman, American X-ray pioneer, died from complications as a result of her work with X-rays.
20th century and beyond
The many applications of X-rays immediately generated enormous interest. Workshops began making specialized versions of Crookes tubes for generating X-rays and these first-generation cold cathode or Crookes X-ray tubes were used until about 1920.
A typical early 20th century medical x-ray system consisted of a Ruhmkorff coil connected to a cold cathode Crookes X-ray tube. A spark gap was typically connected to the high voltage side in parallel to the tube and used for diagnostic purposes. The spark gap allowed detecting the polarity of the sparks, measuring voltage by the length of the sparks thus determining the "hardness" of the vacuum of the tube, and it provided a load in the event the X-ray tube was disconnected. To detect the hardness of the tube, the spark gap was initially opened to the widest setting. While the coil was operating, the operator reduced the gap until sparks began to appear. A tube in which the spark gap began to spark at around 2 1/2 inches was considered soft (low vacuum) and suitable for thin body parts such as hands and arms. A 5 inch spark indicated the tube was suitable for shoulders and knees. A 7-9 inch spark would indicate a higher vacuum suitable for imaging the abdomen of larger individuals. Since the spark gap was connected in parallel to the tube, the spark gap had to be opened until the sparking ceased in order to operate the tube for imaging. Exposure time for photographic plates was around half a minute for a hand to a couple of minutes for a thorax. The plates may have a small addition of fluorescent salt to reduce exposure times.
Crookes tubes were unreliable. They had to contain a small quantity of gas (invariably air) as a current will not flow in such a tube if they are fully evacuated. However, as time passed, the X-rays caused the glass to absorb the gas, causing the tube to generate "harder" X-rays until it soon stopped operating. Larger and more frequently used tubes were provided with devices for restoring the air, known as "softeners". These often took the form of a small side tube which contained a small piece of mica, a mineral that traps relatively large quantities of air within its structure. A small electrical heater heated the mica, causing it to release a small amount of air, thus restoring the tube's efficiency. However, the mica had a limited life, and the restoration process was difficult to control.
In 1904, John Ambrose Fleming invented the thermionic diode, the first kind of vacuum tube. This used a hot cathode that caused an electric current to flow in a vacuum. This idea was quickly applied to X-ray tubes, and hence heated-cathode X-ray tubes, called "Coolidge tubes", completely replaced the troublesome cold cathode tubes by about 1920.
In about 1906, the physicist Charles Barkla discovered that X-rays could be scattered by gases, and that each element had a characteristic X-ray spectrum. He won the 1917 Nobel Prize in Physics for this discovery.
In 1912, Max von Laue, Paul Knipping, and Walter Friedrich first observed the diffraction of X-rays by crystals. This discovery, along with the early work of Paul Peter Ewald, William Henry Bragg, and William Lawrence Bragg, gave birth to the field of X-ray crystallography.
In 1913, Henry Moseley performed crystallography experiments with X-rays emanating from various metals and formulated Moseley's law which relates the frequency of the X-rays to the atomic number of the metal.
The Coolidge X-ray tube was invented the same year by William D. Coolidge. It made possible the continuous emissions of X-rays. Modern X-ray tubes are based on this design, often employing the use of rotating targets which allow for significantly higher heat dissipation than static targets, further allowing higher quantity X-ray output for use in high powered applications such as rotational CT scanners.
The use of X-rays for medical purposes (which developed into the field of radiation therapy) was pioneered by Major John Hall-Edwards in Birmingham, England. Then in 1908, he had to have his left arm amputated because of the spread of X-ray dermatitis on his arm.
In 1914 Marie Curie developed radiological cars to support soldiers injured in World War I. The cars would allow for rapid X-ray imaging of wounded soldiers so battlefield surgeons could quickly and more accurately operate.
From the 1920s through to the 1950s, X-ray machines were developed to assist in the fitting of shoes and were sold to commercial shoe stores. Concerns regarding the impact of frequent or poorly controlled use were expressed in the 1950s, leading to the practice's eventual end that decade.
The X-ray microscope was developed during the 1950s.
The Chandra X-ray Observatory, launched on July 23, 1999, has been allowing the exploration of the very violent processes in the universe which produce X-rays. Unlike visible light, which gives a relatively stable view of the universe, the X-ray universe is unstable. It features stars being torn apart by black holes, galactic collisions, and novae, and neutron stars that build up layers of plasma that then explode into space.
An X-ray laser device was proposed as part of the Reagan Administration's Strategic Defense Initiative in the 1980s, but the only test of the device (a sort of laser "blaster" or death ray, powered by a thermonuclear explosion) gave inconclusive results. For technical and political reasons, the overall project (including the X-ray laser) was de-funded (though was later revived by the second Bush Administration as National Missile Defense using different technologies).
Phase-contrast X-ray imaging refers to a variety of techniques that use phase information of a coherent X-ray beam to image soft tissues. It has become an important method for visualizing cellular and histological structures in a wide range of biological and medical studies. There are several technologies being used for X-ray phase-contrast imaging, all utilizing different principles to convert phase variations in the X-rays emerging from an object into intensity variations. These include propagation-based phase contrast, talbot interferometry, refraction-enhanced imaging, and X-ray interferometry. These methods provide higher contrast compared to normal absorption-contrast X-ray imaging, making it possible to see smaller details. A disadvantage is that these methods require more sophisticated equipment, such as synchrotron or microfocus X-ray sources, X-ray optics, and high resolution X-ray detectors.
Soft and hard X-rays
X-rays with high photon energies (above 5–10 keV, below 0.2–0.1 nm wavelength) are called hard X-rays, while those with lower energy (and longer wavelength) are called soft X-rays. Due to their penetrating ability, hard X-rays are widely used to image the inside of objects, e.g., in medical radiography and airport security. The term X-ray is metonymically used to refer to a radiographic image produced using this method, in addition to the method itself. Since the wavelengths of hard X-rays are similar to the size of atoms, they are also useful for determining crystal structures by X-ray crystallography. By contrast, soft X-rays are easily absorbed in air; the attenuation length of 600 eV (~2 nm) X-rays in water is less than 1 micrometer.
There is no consensus for a definition distinguishing between X-rays and gamma rays. One common practice is to distinguish between the two types of radiation based on their source: X-rays are emitted by electrons, while gamma rays are emitted by the atomic nucleus. This definition has several problems: other processes also can generate these high-energy photons, or sometimes the method of generation is not known. One common alternative is to distinguish X- and gamma radiation on the basis of wavelength (or, equivalently, frequency or photon energy), with radiation shorter than some arbitrary wavelength, such as 10−11 m (0.1 Å), defined as gamma radiation. This criterion assigns a photon to an unambiguous category, but is only possible if wavelength is known. (Some measurement techniques do not distinguish between detected wavelengths.) However, these two definitions often coincide since the electromagnetic radiation emitted by X-ray tubes generally has a longer wavelength and lower photon energy than the radiation emitted by radioactive nuclei. Occasionally, one term or the other is used in specific contexts due to historical precedent, based on measurement (detection) technique, or based on their intended use rather than their wavelength or source. Thus, gamma-rays generated for medical and industrial uses, for example radiotherapy, in the ranges of 6–20 MeV, can in this context also be referred to as X-rays.
X-ray photons carry enough energy to ionize atoms and disrupt molecular bonds. This makes it a type of ionizing radiation, and therefore harmful to living tissue. A very high radiation dose over a short period of time causes radiation sickness, while lower doses can give an increased risk of radiation-induced cancer. In medical imaging this increased cancer risk is generally greatly outweighed by the benefits of the examination. The ionizing capability of X-rays can be utilized in cancer treatment to kill malignant cells using radiation therapy. It is also used for material characterization using X-ray spectroscopy.
Hard X-rays can traverse relatively thick objects without being much absorbed or scattered. For this reason, X-rays are widely used to image the inside of visually opaque objects. The most often seen applications are in medical radiography and airport security scanners, but similar techniques are also important in industry (e.g. industrial radiography and industrial CT scanning) and research (e.g. small animal CT). The penetration depth varies with several orders of magnitude over the X-ray spectrum. This allows the photon energy to be adjusted for the application so as to give sufficient transmission through the object and at the same time provide good contrast in the image.
X-rays have much shorter wavelengths than visible light, which makes it possible to probe structures much smaller than can be seen using a normal microscope. This property is used in X-ray microscopy to acquire high resolution images, and also in X-ray crystallography to determine the positions of atoms in crystals.
Interaction with matter
X-rays interact with matter in three main ways, through photoabsorption, Compton scattering, and Rayleigh scattering. The strength of these interactions depends on the energy of the X-rays and the elemental composition of the material, but not much on chemical properties, since the X-ray photon energy is much higher than chemical binding energies. Photoabsorption or photoelectric absorption is the dominant interaction mechanism in the soft X-ray regime and for the lower hard X-ray energies. At higher energies, Compton scattering dominates.
The probability of a photoelectric absorption per unit mass is approximately proportional to Z3/E3, where Z is the atomic number and E is the energy of the incident photon. This rule is not valid close to inner shell electron binding energies where there are abrupt changes in interaction probability, so called absorption edges. However, the general trend of high absorption coefficients and thus short penetration depths for low photon energies and high atomic numbers is very strong. For soft tissue, photoabsorption dominates up to about 26 keV photon energy where Compton scattering takes over. For higher atomic number substances this limit is higher. The high amount of calcium (Z=20) in bones together with their high density is what makes them show up so clearly on medical radiographs.
A photoabsorbed photon transfers all its energy to the electron with which it interacts, thus ionizing the atom to which the electron was bound and producing a photoelectron that is likely to ionize more atoms in its path. An outer electron will fill the vacant electron position and produce either a characteristic x-ray or an Auger electron. These effects can be used for elemental detection through X-ray spectroscopy or Auger electron spectroscopy.
Compton scattering is the predominant interaction between X-rays and soft tissue in medical imaging. Compton scattering is an inelastic scattering of the X-ray photon by an outer shell electron. Part of the energy of the photon is transferred to the scattering electron, thereby ionizing the atom and increasing the wavelength of the X-ray. The scattered photon can go in any direction, but a direction similar to the original direction is more likely, especially for high-energy X-rays. The probability for different scattering angles are described by the Klein–Nishina formula. The transferred energy can be directly obtained from the scattering angle from the conservation of energy and momentum.
Rayleigh scattering is the dominant elastic scattering mechanism in the X-ray regime. Inelastic forward scattering gives rise to the refractive index, which for X-rays is only slightly below 1.
Whenever charged particles (electrons or ions) of sufficient energy hit a material, X-rays are produced.
Production by electrons
X-rays can be generated by an X-ray tube, a vacuum tube that uses a high voltage to accelerate the electrons released by a hot cathode to a high velocity. The high velocity electrons collide with a metal target, the anode, creating the X-rays. In medical X-ray tubes the target is usually tungsten or a more crack-resistant alloy of rhenium (5%) and tungsten (95%), but sometimes molybdenum for more specialized applications, such as when softer X-rays are needed as in mammography. In crystallography, a copper target is most common, with cobalt often being used when fluorescence from iron content in the sample might otherwise present a problem.
The maximum energy of the produced X-ray photon is limited by the energy of the incident electron, which is equal to the voltage on the tube times the electron charge, so an 80 kV tube cannot create X-rays with an energy greater than 80 keV. When the electrons hit the target, X-rays are created by two different atomic processes:
So, the resulting output of a tube consists of a continuous bremsstrahlung spectrum falling off to zero at the tube voltage, plus several spikes at the characteristic lines. The voltages used in diagnostic X-ray tubes range from roughly 20 kV to 150 kV and thus the highest energies of the X-ray photons range from roughly 20 keV to 150 keV.
Both of these X-ray production processes are inefficient, with only about one percent of the electrical energy used by the tube converted into X-rays, and thus most of the electric power consumed by the tube is released as waste heat. When producing a usable flux of X-rays, the X-ray tube must be designed to dissipate the excess heat.
A specialized source of X-rays which is becoming widely used in research is synchrotron radiation, which is generated by particle accelerators. Its unique features are X-ray outputs many orders of magnitude greater than those of X-ray tubes, wide X-ray spectra, excellent collimation, and linear polarization.
Short nanosecond bursts of X-rays peaking at 15-keV in energy may be reliably produced by peeling pressure-sensitive adhesive tape from its backing in a moderate vacuum. This is likely to be the result of recombination of electrical charges produced by triboelectric charging. The intensity of X-ray triboluminescence is sufficient for it to be used as a source for X-ray imaging.
Production by fast positive ions
X-rays can also be produced by fast protons or other positive ions. The proton-induced X-ray emission or particle-induced X-ray emission is widely used as an analytical procedure. For high energies, the production cross section is proportional to Z12Z2−4, where Z1 refers to the atomic number of the ion, Z2 refers to that of the target atom. An overview of these cross sections is given in the same reference.
Production in lightning and laboratory discharges
X-rays are also produced in lightning accompanying terrestrial gamma-ray flashes. The underlying mechanism is the acceleration of electrons in lightning related electric fields and the subsequent production of photons through Bremsstrahlung. This produces photons with energies of some few keV and several tens of MeV. In laboratory discharges with a gap size of approximately 1 meter length and a peak voltage of 1 MV, X-rays with a characteristic energy of 160 keV are observed. A possible explanation is the encounter of two streamers and the production of high-energy run-away electrons; however, microscopic simulations have shown that the duration of electric field enhancement between two streamers is too short to produce a significantly number of run-away electrons. Recently, it has been proposed that air perturbations in the vicinity of streamers can facilitate the production of run-away electrons and hence of X-rays from discharges.
X-ray detectors vary in shape and function depending on their purpose. Imaging detectors such as those used for radiography were originally based on photographic plates and later photographic film, but are now mostly replaced by various digital detector types such as image plates and flat panel detectors. For radiation protection direct exposure hazard is often evaluated using ionization chambers, while dosimeters are used to measure the radiation dose a person has been exposed to. X-ray spectra can be measured either by energy dispersive or wavelength dispersive spectrometers. For x-ray diffraction applications, such as x-ray crystallography, hybrid photon counting detectors are widely used.
Since Röntgen's discovery that X-rays can identify bone structures, X-rays have been used for medical imaging. The first medical use was less than a month after his paper on the subject. Up to 2010, five billion medical imaging examinations had been conducted worldwide. Radiation exposure from medical imaging in 2006 made up about 50% of total ionizing radiation exposure in the United States.
Projectional radiography is the practice of producing two-dimensional images using x-ray radiation. Bones contain much calcium, which due to its relatively high atomic number absorbs x-rays efficiently. This reduces the amount of X-rays reaching the detector in the shadow of the bones, making them clearly visible on the radiograph. The lungs and trapped gas also show up clearly because of lower absorption compared to tissue, while differences between tissue types are harder to see.
Projectional radiographs are useful in the detection of pathology of the skeletal system as well as for detecting some disease processes in soft tissue. Some notable examples are the very common chest X-ray, which can be used to identify lung diseases such as pneumonia, lung cancer, or pulmonary edema, and the abdominal x-ray, which can detect bowel (or intestinal) obstruction, free air (from visceral perforations) and free fluid (in ascites). X-rays may also be used to detect pathology such as gallstones (which are rarely radiopaque) or kidney stones which are often (but not always) visible. Traditional plain X-rays are less useful in the imaging of soft tissues such as the brain or muscle. One area where projectional radiographs are used extensively is in evaluating how an orthopedic implant, such as a knee, hip or shoulder replacement, is situated in the body with respect to the surrounding bone. This can be assessed in two dimensions from plain radiographs, or it can be assessed in three dimensions if a technique called '2D to 3D registration' is used. This technique purportedly negates projection errors associated with evaluating implant position from plain radiographs.
In medical diagnostic applications, the low energy (soft) X-rays are unwanted, since they are totally absorbed by the body, increasing the radiation dose without contributing to the image. Hence, a thin metal sheet, often of aluminium, called an X-ray filter, is usually placed over the window of the X-ray tube, absorbing the low energy part in the spectrum. This is called hardening the beam since it shifts the center of the spectrum towards higher energy (or harder) x-rays.
To generate an image of the cardiovascular system, including the arteries and veins (angiography) an initial image is taken of the anatomical region of interest. A second image is then taken of the same region after an iodinated contrast agent has been injected into the blood vessels within this area. These two images are then digitally subtracted, leaving an image of only the iodinated contrast outlining the blood vessels. The radiologist or surgeon then compares the image obtained to normal anatomical images to determine whether there is any damage or blockage of the vessel.
Computed tomography (CT scanning) is a medical imaging modality where tomographic images or slices of specific areas of the body are obtained from a large series of two-dimensional X-ray images taken in different directions. These cross-sectional images can be combined into a three-dimensional image of the inside of the body and used for diagnostic and therapeutic purposes in various medical disciplines.
Fluoroscopy is an imaging technique commonly used by physicians or radiation therapists to obtain real-time moving images of the internal structures of a patient through the use of a fluoroscope. In its simplest form, a fluoroscope consists of an X-ray source and a fluorescent screen, between which a patient is placed. However, modern fluoroscopes couple the screen to an X-ray image intensifier and CCD video camera allowing the images to be recorded and played on a monitor. This method may use a contrast material. Examples include cardiac catheterization (to examine for coronary artery blockages) and barium swallow (to examine for esophageal disorders and swallowing disorders).
The use of X-rays as a treatment is known as radiation therapy and is largely used for the management (including palliation) of cancer; it requires higher radiation doses than those received for imaging alone. X-rays beams are used for treating skin cancers using lower energy x-ray beams while higher energy beams are used for treating cancers within the body such as brain, lung, prostate, and breast.
Diagnostic X-rays (primarily from CT scans due to the large dose used) increase the risk of developmental problems and cancer in those exposed. X-rays are classified as a carcinogen by both the World Health Organization's International Agency for Research on Cancer and the U.S. government. It is estimated that 0.4% of current cancers in the United States are due to computed tomography (CT scans) performed in the past and that this may increase to as high as 1.5-2% with 2007 rates of CT usage.
Experimental and epidemiological data currently do not support the proposition that there is a threshold dose of radiation below which there is no increased risk of cancer. However, this is under increasing doubt. It is estimated that the additional radiation from diagnostic X-rays will increase the average person's cumulative risk of getting cancer by age 75 by 0.6–3.0%. The amount of absorbed radiation depends upon the type of X-ray test and the body part involved. CT and fluoroscopy entail higher doses of radiation than do plain X-rays.
To place the increased risk in perspective, a plain chest X-ray will expose a person to the same amount from background radiation that people are exposed to (depending upon location) every day over 10 days, while exposure from a dental X-ray is approximately equivalent to 1 day of environmental background radiation. Each such X-ray would add less than 1 per 1,000,000 to the lifetime cancer risk. An abdominal or chest CT would be the equivalent to 2–3 years of background radiation to the whole body, or 4–5 years to the abdomen or chest, increasing the lifetime cancer risk between 1 per 1,000 to 1 per 10,000. This is compared to the roughly 40% chance of a US citizen developing cancer during their lifetime. For instance, the effective dose to the torso from a CT scan of the chest is about 5 mSv, and the absorbed dose is about 14 mGy. A head CT scan (1.5mSv, 64mGy) that is performed once with and once without contrast agent, would be equivalent to 40 years of background radiation to the head. Accurate estimation of effective doses due to CT is difficult with the estimation uncertainty range of about ±19% to ±32% for adult head scans depending upon the method used.
The risk of radiation is greater to a fetus, so in pregnant patients, the benefits of the investigation (X-ray) should be balanced with the potential hazards to the fetus. In the US, there are an estimated 62 million CT scans performed annually, including more than 4 million on children. Avoiding unnecessary X-rays (especially CT scans) reduces radiation dose and any associated cancer risk.
Medical X-rays are a significant source of man-made radiation exposure. In 1987, they accounted for 58% of exposure from man-made sources in the United States. Since man-made sources accounted for only 18% of the total radiation exposure, most of which came from natural sources (82%), medical X-rays only accounted for 10% of total American radiation exposure; medical procedures as a whole (including nuclear medicine) accounted for 14% of total radiation exposure. By 2006, however, medical procedures in the United States were contributing much more ionizing radiation than was the case in the early 1980s. In 2006, medical exposure constituted nearly half of the total radiation exposure of the U.S. population from all sources. The increase is traceable to the growth in the use of medical imaging procedures, in particular computed tomography (CT), and to the growth in the use of nuclear medicine.
Dosage due to dental X-rays varies significantly depending on the procedure and the technology (film or digital). Depending on the procedure and the technology, a single dental X-ray of a human results in an exposure of 0.5 to 4 mrem. A full mouth series of X-rays may result in an exposure of up to 6 (digital) to 18 (film) mrem, for a yearly average of up to 40 mrem.
Financial incentives have been shown to have a significant impact on X-ray use with doctors who are paid a separate fee for each X-ray providing more X-rays.
Other notable uses of X-rays include
X-ray crystallography in which the pattern produced by the diffraction of X-rays through the closely spaced lattice of atoms in a crystal is recorded and then analysed to reveal the nature of that lattice. In the early 1990s, experiments were done in which layers a few atoms thick of two different materials were deposited in a Thue-Morse sequence. The resulting object was found to yield X-ray diffraction patterns. A related technique, fiber diffraction, was used by Rosalind Franklin to discover the double helical structure of DNA. X-ray astronomy, which is an observational branch of astronomy, which deals with the study of X-ray emission from celestial objects. X-ray microscopic analysis, which uses electromagnetic radiation in the soft X-ray band to produce images of very small objects. X-ray fluorescence, a technique in which X-rays are generated within a specimen and detected. The outgoing energy of the X-ray can be used to identify the composition of the sample. Industrial radiography uses X-rays for inspection of industrial parts, particularly welds.
Authentication and quality control, X-ray is used for authentication and quality control of packaged items. Industrial CT (computed tomography) is a process which uses X-ray equipment to produce three-dimensional representations of components both externally and internally. This is accomplished through computer processing of projection images of the scanned object in many directions. Paintings are often X-rayed to reveal underdrawings and pentimenti, alterations in the course of painting or by later restorers. Many pigments such as lead white show well in radiographs. X-ray spectromicroscopy has been used to analyse the reactions of pigments in paintings. For example, in analysing colour degradation in the paintings of van Gogh. Airport security luggage scanners use X-rays for inspecting the interior of luggage for security threats before loading on aircraft. Border control truck scanners and domestic police departments use X-rays for inspecting the interior of trucks.
X-ray art and fine art photography, artistic use of X-rays, for example the works by Stane Jagodič X-ray hair removal, a method popular in the 1920s but now banned by the FDA. Shoe-fitting fluoroscopes were popularized in the 1920s, banned in the US in the 1960s, banned in the UK in the 1970s, and even later in continental Europe. Roentgen stereophotogrammetry is used to track movement of bones based on the implantation of markers X-ray photoelectron spectroscopy is a chemical analysis technique relying on the photoelectric effect, usually employed in surface science. Radiation implosion is the use of high energy X-rays generated from a fission explosion (an A-bomb) to compress nuclear fuel to the point of fusion ignition (an H-bomb).
While generally considered invisible to the human eye, in special circumstances X-rays can be visible. Brandes, in an experiment a short time after Röntgen's landmark 1895 paper, reported after dark adaptation and placing his eye close to an X-ray tube, seeing a faint "blue-gray" glow which seemed to originate within the eye itself. Upon hearing this, Röntgen reviewed his record books and found he too had seen the effect. When placing an X-ray tube on the opposite side of a wooden door Röntgen had noted the same blue glow, seeming to emanate from the eye itself, but thought his observations to be spurious because he only saw the effect when he used one type of tube. Later he realized that the tube which had created the effect was the only one powerful enough to make the glow plainly visible and the experiment was thereafter readily repeatable. The knowledge that X-rays are actually faintly visible to the dark-adapted naked eye has largely been forgotten today; this is probably due to the desire not to repeat what would now be seen as a recklessly dangerous and potentially harmful experiment with ionizing radiation. It is not known what exact mechanism in the eye produces the visibility: it could be due to conventional detection (excitation of rhodopsin molecules in the retina), direct excitation of retinal nerve cells, or secondary detection via, for instance, X-ray induction of phosphorescence in the eyeball with conventional retinal detection of the secondarily produced visible light.
Though X-rays are otherwise invisible, it is possible to see the ionization of the air molecules if the intensity of the X-ray beam is high enough. The beamline from the wiggler at the ID11 at the European Synchrotron Radiation Facility is one example of such high intensity.
Units of measure and exposure
The measure of X-rays ionizing ability is called the exposure:
However, the effect of ionizing radiation on matter (especially living tissue) is more closely related to the amount of energy deposited into them rather than the charge generated. This measure of energy absorbed is called the absorbed dose: