طیف نشری یا طیف گسیلی (انگلیسی: Emission spectrum) یک عنصر یا ترکیب شیمیایی، طیفی از بسامدهای تابش الکترومغناطیس است که توسط یک اتم یا مولکول، به دلیل انتقال الکترونی از انرژی بالاتر به انرژی پایینتر منتشر گردد. در طیف گسیلی، همیشه باید پیشتر جذب صورت پذیرفته باشد تا طیف جذب شده، گسیل گردد.
انواع طیف گسیلی[ویرایش]
طیفهای گسیلی از نظر منبع تولیدکننده به دو دسته خطی و پیوسته تقسیم میشوند:
طیف گسیلی پیوسته[ویرایش]
این طیف از اجسام جامد ملتهب یا مایعات حاصل از ذوب آنها تشکیل میشود و برای تمام مواد تقریباً شکل یکسانی دارد یعنی مثل طیف حالت گازی وسیلهای برای تمیز دادن عناصر از یکدیگر نیست. به عنوان مثال اگر فلزی مثل آهن یا مس یا روی و امثال آنها به تدریج گرم شوند تا به حد گداخته شدن برسند، از خود طیفی با رنگ خاص گسیل میدهند. مثلاً آهن نخست به رنگ قرمز تیره درمیآید و با افزایش دما به رنگ نارنجی و سپس سفید درمیآید، و اگر باز هم دما بالاتر رود، رنگ های طیف تغییر نمیکند و فقط شدت نور در نواحی مختلف زیاد میشود. تفاوت عناصر مختلف، تشکیل طیف نور مرئی از قرمز تا بنفش در دماهای متفاوت است. تعریف طی جذبی گسسته: وقتی نور از داخل شیشهء رنگی عبور می کند بعضی خطوط سیاه در طیف نما دیده می شود. این طیف را جذبی گسسته و آن خطوط را خطوط فرانهوفر می نامند.
طیف گسیلی خطی[ویرایش]
این طیف از تابش توسط بخار بسیار رقیق عنصرها شکل میگیرد. اگر این نور را از منشور گذرانده شود، مشاهده میگردد که این طیف پیوسته نیست و تنها از چند خط رنگی جدا از هم با طول موجهای معین تشکیل شده است.
طیف نور گسیل شده از بخار هر عنصر را طیف اتمی آن عنصر مینامند. طیف اتمی حاصل از نور گسیل شده از بخار عنصرها را طیف گسیلی (یا نشری) آن اتم مینامند. این نوع طیف از بخارهای عناصر در دمای زیاد و فشار کم و همچنین گازها تشکیل میشود و از ویژگیهای مختص هر عنصر است. طیف نشری خطی هیچ دو عنصری شبیه هم نیست و همانطور که قبلاً نیز گفتیم مثل اثر انگشت افراد مختلف فرق میکند.
لامپهای گسیل خطی[ویرایش]
این لامپها به صورت لولههای باریک شیشهای هستند که درون آنها گاز رقیق در فشار کم وجود دارد. در لوله دو الکترود کاتد و آند قرار دارند که اگر بین آنها ولتاژ بالایی برقرار شود، اتمهای گاز رقیق شروع به گسیل نور میکنند. نور گسیل شده از بخار عنصرهای متفاوت با یکدیگر تفاوت دارد. برای مثال نور حاصل از بخار جیوه به رنگ نیلی - آبی است. وقتی نور از بخار مایعات عبور می کند یک خط فرانهوفر در طیفش دیده می شود. این خط ناشی از جذب آن فرکانس توسّط بخار مایع است. این طیف را جذبی خطّی می گویند.
The emission spectrum of a chemical element or chemical compound is the spectrum of frequencies of electromagnetic radiation emitted due to an atom or molecule making a transition from a high energy state to a lower energy state. The photon energy of the emitted photon is equal to the energy difference between the two states. There are many possible electron transitions for each atom, and each transition has a specific energy difference. This collection of different transitions, leading to different radiated wavelengths, make up an emission spectrum. Each element's emission spectrum is unique. Therefore, spectroscopy can be used to identify the elements in matter of unknown composition. Similarly, the emission spectra of molecules can be used in chemical analysis of substances.
In physics, emission is the process by which a higher energy quantum mechanical state of a particle becomes converted to a lower one through the emission of a photon, resulting in the production of light. The frequency of light emitted is a function of the energy of the transition. Since energy must be conserved, the energy difference between the two states equals the energy carried off by the photon. The energy states of the transitions can lead to emissions over a very large range of frequencies. For example, visible light is emitted by the coupling of electronic states in atoms and molecules (then the phenomenon is called fluorescence or phosphorescence). On the other hand, nuclear shell transitions can emit high energy gamma rays, while nuclear spin transitions emit low energy radio waves.
The emittance of an object quantifies how much light is emitted by it. This may be related to other properties of the object through the Stefan–Boltzmann law. For most substances, the amount of emission varies with the temperature and the spectroscopic composition of the object, leading to the appearance of color temperature and emission lines. Precise measurements at many wavelengths allow the identification of a substance via emission spectroscopy.
Emission of radiation is typically described using semi-classical quantum mechanics: the particle's energy levels and spacings are determined from quantum mechanics, and light is treated as an oscillating electric field that can drive a transition if it is in resonance with the system's natural frequency. The quantum mechanics problem is treated using time-dependent perturbation theory and leads to the general result known as Fermi's golden rule. The description has been superseded by quantum electrodynamics, although the semi-classical version continues to be more useful in most practical computations.
When the electrons in the atom are excited, for example by being heated, the additional energy pushes the electrons to higher energy orbitals. When the electrons fall back down and leave the excited state, energy is re-emitted in the form of a photon. The wavelength (or equivalently, frequency) of the photon is determined by the difference in energy between the two states. These emitted photons form the element's spectrum.
The fact that only certain colors appear in an element's atomic emission spectrum means that only certain frequencies of light are emitted. Each of these frequencies are related to energy by the formula:
where is the energy of the photon, is its frequency, and is Planck's constant. This concludes that only photons with specific energies are emitted by the atom. The principle of the atomic emission spectrum explains the varied colors in neon signs, as well as chemical flame test results (described below).
The frequencies of light that an atom can emit are dependent on states the electrons can be in. When excited, an electron moves to a higher energy level or orbital. When the electron falls back to its ground level the light is emitted.
The above picture shows the visible light emission spectrum for hydrogen. If only a single atom of hydrogen were present, then only a single wavelength would be observed at a given instant. Several of the possible emissions are observed because the sample contains many hydrogen atoms that are in different initial energy states and reach different final energy states. These different combinations lead to simultaneous emissions at different wavelengths.
Radiation from molecules
As well as the electronic transitions discussed above, the energy of a molecule can also change via rotational, vibrational, and vibronic (combined vibrational and electronic) transitions. These energy transitions often lead to closely spaced groups of many different spectral lines, known as spectral bands. Unresolved band spectra may appear as a spectral continuum.
Light consists of electromagnetic radiation of different wavelengths. Therefore, when the elements or their compounds are heated either on a flame or by an electric arc they emit energy in the form of light. Analysis of this light, with the help of a spectroscope gives us a discontinuous spectrum. A spectroscope or a spectrometer is an instrument which is used for separating the components of light, which have different wavelengths. The spectrum appears in a series of lines called the line spectrum. This line spectrum is called an atomic spectrum when it originates from an atom in elemental form. Each element has a different atomic spectrum. The production of line spectra by the atoms of an element indicate that an atom can radiate only a certain amount of energy. This leads to the conclusion that bound electrons cannot have just any amount of energy but only a certain amount of energy.
The emission spectrum can be used to determine the composition of a material, since it is different for each element of the periodic table. One example is astronomical spectroscopy: identifying the composition of stars by analysing the received light. The emission spectrum characteristics of some elements are plainly visible to the naked eye when these elements are heated. For example, when platinum wire is dipped into a strontium nitrate solution and then inserted into a flame, the strontium atoms emit a red color. Similarly, when copper is inserted into a flame, the flame becomes green. These definite characteristics allow elements to be identified by their atomic emission spectrum. Not all emitted lights are perceptible to the naked eye, as the spectrum also includes ultraviolet rays and infrared lighting. An emission is formed when an excited gas is viewed directly through a spectroscope.
Emission spectroscopy is a spectroscopic technique which examines the wavelengths of photons emitted by atoms or molecules during their transition from an excited state to a lower energy state. Each element emits a characteristic set of discrete wavelengths according to its electronic structure, and by observing these wavelengths the elemental composition of the sample can be determined. Emission spectroscopy developed in the late 19th century and efforts in theoretical explanation of atomic emission spectra eventually led to quantum mechanics.
There are many ways in which atoms can be brought to an excited state. Interaction with electromagnetic radiation is used in fluorescence spectroscopy, protons or other heavier particles in Particle-Induced X-ray Emission and electrons or X-ray photons in Energy-dispersive X-ray spectroscopy or X-ray fluorescence. The simplest method is to heat the sample to a high temperature, after which the excitations are produced by collisions between the sample atoms. This method is used in flame emission spectroscopy, and it was also the method used by Anders Jonas Ångström when he discovered the phenomenon of discrete emission lines in the 1850s.
Although the emission lines are caused by a transition between quantized energy states and may at first look very sharp, they do have a finite width, i.e. they are composed of more than one wavelength of light. This spectral line broadening has many different causes.
Emission spectroscopy is often referred to as optical emission spectroscopy because of the light nature of what is being emitted.
See the history of spectroscopy for details.
Experimental technique in flame emission spectroscopy
The solution containing the relevant substance to be analysed is drawn into the burner and dispersed into the flame as a fine spray. The solvent evaporates first, leaving finely divided solid particles which move to the hottest region of the flame where gaseous atoms and ions are produced. Here electrons are excited as described above. It is common for a monochromator to be used to allow for easy detection.
On a simple level, flame emission spectroscopy can be observed using just a flame and samples of metal salts. This method of qualitative analysis is called a flame test. For example, sodium salts placed in the flame will glow yellow from sodium ions, while strontium (used in road flares) ions color it red. Copper wire will create a blue colored flame, however in the presence of chloride gives green (molecular contribution by CuCl).
Emission coefficient is a coefficient in the power output per unit time of an electromagnetic source, a calculated value in physics. The emission coefficient of a gas varies with the wavelength of the light. It has units of ms−3sr−1. It is also used as a measure of environmental emissions (by mass) per MWh of electricity generated, see: Emission factor.
Scattering of light
In Thomson scattering a charged particle emits radiation under incident light. The particle may be an ordinary atomic electron, so emission coefficients have practical applications.
If X dV dΩ dλ is the energy scattered by a volume element dV into solid angle dΩ between wavelengths λ and λ+dλ per unit time then the Emission coefficient is X.
The values of X in Thomson scattering can be predicted from incident flux, the density of the charged particles and their Thomson differential cross section (area/solid angle).
A warm body emitting photons has a monochromatic emission coefficient relating to its temperature and total power radiation. This is sometimes called the second Einstein coefficient, and can be deduced from quantum mechanical theory.