اتیلن یا اتن، سادهترین هیدروکربن غیر اشباع بوده و اولین عضو از گروه آلکنها میباشد. فرمول شیمیایی آن C2H4 بوده، بین دو اتم کربن پیوند دوگانه وجود دارد. به دلیل وجود این پیوند دوگانه، اتیلن ایزومر صورتبندی ندارد، یعنی دو نیمه مولکول نمیتوانند با چرخش حول پیوند دوگانه، صورتبندی خود را تغییر دهند.
اتیلن دارای ساختمان مسطح بوده، زاویه بین دو اتصال کربن-هیدروژن، ۱۱۷ درجه میباشد. یعنی مقداری بستهتر از زاویه ۱۲۰ درجه که برای هیبریداسیون sp2 مناسب میباشد. اتیلن گازی بیرنگ و آتشگیر بهشمار میرود و در ترکیب نفت و گاز طبیعی یافت میشود.
در سال ۱۷۹۵، اتیلن را گاز اولفین مینامیدند. اولین سنتز ترکیبات اتیلن (دی کلرو اتان) در سال ۱۷۹۵ توسط شیمیدان هلندی انجام شد. در اواسط قرن ۱۹ به علت اینکه C2H4 یک هیدروژن از C2H5 اتیل کم داشت، پسوندهای ene (از ریشه یونانی) به آخر اتیل اضافه کرده و از آن به بعد گاز اولفین را اتیلن مینامند. تا سال ۱۸۵۲ در متون علمی واژه اتیلن استفاده میشد.
در سال ۱۸۶۶ «هافمن» شیمیدان آلمانی، سیستم نامگذاری هیدروکربنها را بر پایه آلکان بنا نهاد. در این سیستم، هر هیدروکربنی که از آلکان مربوطه دو هیدروژن کمتر داشت، آلکن با فرمول CnH2n و اگر چهار هیدروژن از آلکان مربوطه کم داشت آلکین CnH2n-2 نامیده میشود. طبق این نامگذاری، اتیلن به اتن تغییر نام یافت. انجمن بینالمللی شیمیدانها در سال ۱۸۹۲ این نام را وارد نامگذاری آیوپاک کردند و از آن تاریخ تا امروز، این نام در متون علمی و کتابهای درسی و … مورد استفاده قرار میگیرد. جرم مولکولی این ترکیب ۰۵/۲۸گرم بر مول و چگالی آن ۲۶/۱ گرم بر لیتر میباشد. قابلیت انحلال آن 250mL در یک لیتر آب صفر درجه است. نقطه ذوب آن °41.04K و نقطه جوش آن °169.4K و حد انفجارش ۲٫۷ تا ۳۶٪ در هواست.
اتیلن در صنایع پتروشیمی با روش کراکینگ با بخار آب تولید میشود. در این فرایند هیدروکربنهای گازی و محلولهای سبک هیدروکربن حاصل از نفت به مدت بسیار کوتاه در دمای ۹۵۰–۷۵۰ درجه سانتیگراد حرارت داده میشوند. عموماً در این واکنش هیدروکربنهای بزرگ به هیدروکربنهای کوچک شکسته شده، هیدروکربنهای اشباع با از دست دادن هیدروژن به هیدروکربنهای غیر اشباع تبدیل میشوند.
محصول این واکنش مخلوطی از انواع هیدروکربنهاست که اتیلن عمدهترین آن میباشد. مخلوط را بهوسیله متراکمسازی و تقطیر جز به جز جداسازی میکنند. روشهای دیگر، هیدروژندار کردن استیلن با استفاده از کاتالیزور و آبگیری از اتانول میباشد.
واکنشهای شیمیایی مربوطه[ویرایش]
آلکنها به علت داشتن پیوند دوگانه در واکنشهای افزایشی شرکت میکنند. هالوژنها با اتیلن واکنش داده و تولید هالو اتان میکند. با افزودن آب به پیوند دوگانه اتانول تولید میشود، اما سرعت واکنش بدون حضور کاتالیزگر پایین میباشد. در حضور کاتالیزگرهای فلزی نظیر پلاتین، نیکل و … و فشار بالا، اتیلن، هیدروژندار شده، به اتان تبدیل میشود. اتیلن در حضور پراسیدها به اتواکسید که یک ترکیب حلقوی است تبدیل میشود. اتیلن در حضور رادیکالهایی که واکنش بسپارش را آغاز میکنند، به پلی اتیلن پلیمریزه میشود.
اتیلن ماده اولیه مهم برای تولید بسیاری از ترکیبات آلی پر مصرف در صنعت بهشمار میرود. اتیلن به صورت گسترده در صنعت پلاستیک مورد استفاده قرار میگیرد. اتیلن با پلیمریزه شدن، پلی اتیلن را تولید میکند که یک پلاستیک بسیار مهم است. با تکرار شدن، پیش ماده پلی وینیل کلرید (PVC) را تولید میکند. با ترکیب شدن، بنزن، اتیل بنزن ایجاد میکند که ماده اصلی پلی استر میباشد.
اتیلن، نوعی هورمون گیاهی است که باعث رسیدن میوهها، باز شدن شکوفه ها و گلها و همچنین ریزش برگها در پاییز میشود. به دلیل این خاصیت در کشاورزی مورد استفاده قرار میگیرد. برای جلوگیری از خراب شدن میوههایی مانند سیب، گلابی و موز، در حمل و نقل یا انبار، آنها را کمی نارس میچینند و قبل از وارد کردن به بازار، تحت تأثیر اتیلن قرار میدهند تا رسیده شود.
اتیلن، رنگ قهوهای محلول برم در تتراکلرید کربن را بیرنگ میکند و رنگ بنفش محلول سرد و رقیق پرمنگنات پتاسیم را از بین میبرد و در نتیجه واکنش رسوبات قهوهای MnO2 حاصل میشود. در اسید سولفوریک سردو غلیظ حل میشود.
Ethylene (IUPAC name: ethene) is a hydrocarbon which has the formula C
Ethylene is widely used in the chemical industry, and its worldwide production (over 150 million tonnes in 2016) exceeds that of any other organic compound. Much of this production goes toward polyethylene, a widely used plastic containing polymer chains of ethylene units in various chain lengths. Ethylene is also an important natural plant hormone and is used in agriculture to force the ripening of fruits. Ethylene's hydrate is ethanol.
Structure and properties
This hydrocarbon has four hydrogen atoms bound to a pair of carbon atoms that are connected by a double bond. All six atoms that comprise ethylene are coplanar. The H-C-H angle is 117.4°, close to the 120° for ideal sp² hybridized carbon. The molecule is also relatively rigid: rotation about the C-C bond is a high energy process that requires breaking the π-bond.
The π-bond in the ethylene molecule is responsible for its useful reactivity. The double bond is a region of high electron density, thus it is susceptible to attack by electrophiles. Many reactions of ethylene are catalyzed by transition metals, which bind transiently to the ethylene using both the π and π* orbitals.
Ethylene prevents elongation of stem , Ethylene can break the dormancy of buds and seeds .
Major industrial reactions of ethylene include in order of scale: 1) polymerization, 2) oxidation, 3) halogenation and hydrohalogenation, 4) alkylation, 5) hydration, 6) oligomerization, and 7) hydroformylation. In the United States and Europe, approximately 90% of ethylene is used to produce ethylene oxide, ethylene dichloride, ethylbenzene and polyethylene. Most of the reactions with ethylene are electrophilic addition.
Flower initiation - Cucumber plants are treated with ethylene increases the number female flowers and Fruits .
Polyethylene consumes more than half of the world's ethylene supply. Polyethylene, also called polyethene, is the world's most widely used plastic. It is primarily used to make films in packaging, carrier bags and trash liners. Linear alpha-olefins, produced by oligomerization (formation of short polymers) are used as precursors, detergents, plasticisers, synthetic lubricants, additives, and also as co-monomers in the production of polyethylenes.
Ethylene is oxidized to produce ethylene oxide, a key raw material in the production of surfactants and detergents by ethoxylation. Ethylene oxide is also hydrolyzed to produce ethylene glycol, widely used as an automotive antifreeze as well as higher molecular weight glycols, glycol ethers and polyethylene terephthalate.
Ethylene undergoes oxidation by palladium to give acetaldehyde. This conversion remains a major industrial process (10M kg/y). The process proceeds via the initial complexation of ethylene to a Pd(II) center.
Halogenation and hydrohalogenation
Major intermediates from the halogenation and hydrohalogenation of ethylene include ethylene dichloride, ethyl chloride and ethylene dibromide. The addition of chlorine entails "oxychlorination," i.e. chlorine itself is not used. Some products derived from this group are polyvinyl chloride, trichloroethylene, perchloroethylene, methyl chloroform, polyvinylidene chloride and copolymers, and ethyl bromide.
Major chemical intermediates from the alkylation with ethylene is ethylbenzene, precursor to styrene. Styrene is used principally in polystyrene for packaging and insulation, as well as in styrene-butadiene rubber for tires and footwear. On a smaller scale, ethyltoluene, ethylanilines, 1,4-hexadiene, and aluminium alkyls. Products of these intermediates include polystyrene, unsaturated polyesters and ethylene-propylene terpolymers.
Ethylene has long represented the major nonfermentative precursor to ethanol. The original method entailed its conversion to diethyl sulfate, followed by hydrolysis. The main method practiced since the mid-1990s is the direct hydration of ethylene catalyzed by solid acid catalysts:
Dimerization to butenes
Ethylene is dimerized by hydrovinylation to give n-butenes using processes licensed by Lummus or IFP. The Lummus process produces mixed n-butenes (primarily 2-butenes) while the IFP process produces 1-butene. 1-Butene is used as a comonomer in the production of certain kinds of polyethylene.
Global ethylene production was 107 million tonnes in 2005, 109 million tonnes in 2006, 138 million tonnes in 2010 and 141 million tonnes in 2011. By 2013 ethylene was produced by at least 117 companies in 32 countries. To meet the ever-increasing demand for ethylene, sharp increases in production facilities are added globally, particularly in the Mideast and in China.
Ethylene is produced by several methods in the petrochemical industry. A primary method is steam cracking (SC) where hydrocarbons and steam are heated to 750–950 °C.This process converts large hydrocarbons into smaller ones and introduces unsaturation. When ethane is the feedstock, ethylene is the product. Ethylene is separated from the resulting mixture by repeated compression and distillation. In Europe and Asia, ethylene is obtained mainly from cracking naphtha, gasoil and condensates with the coproduction of propylene, C4 olefins and aromatics (pyrolysis gasoline).  Other technologies employed for the production of ethylene include oxidative coupling of methane, Fischer-Tropsch synthesis, methanol-to-olefins (MTO), and catalytic dehydrogenation.
Although of great value industrially, ethylene is rarely synthesized in the laboratory and is ordinarily purchased. It can be produced via dehydration of ethanol with sulfuric acid or in the gas phase with aluminium oxide.
Ethylene as a plant hormone
Ethylene serves as a hormone in plants. It acts at trace levels throughout the life of the plant by stimulating or regulating the ripening of fruit, the opening of flowers, and the abscission (or shedding) of leaves. Commercial ripening rooms use "catalytic generators" to make ethylene gas from a liquid supply of ethanol. Typically, a gassing level of 500 to 2,000 ppm is used, for 24 to 48 hours. Care must be taken to control carbon dioxide levels in ripening rooms when gassing, as high temperature ripening (20 °C; 68 °F) has been seen to produce CO2 levels of 10% in 24 hours.
History of ethylene in plant biology
Ethylene has been used since the ancient Egyptians, who would gash figs in order to stimulate ripening (wounding stimulates ethylene production by plant tissues). The ancient Chinese would burn incense in closed rooms to enhance the ripening of pears. In 1864, it was discovered that gas leaks from street lights led to stunting of growth, twisting of plants, and abnormal thickening of stems. In 1901, a Russian scientist named Dimitry Neljubow showed that the active component was ethylene. Sarah Doubt discovered that ethylene stimulated abscission in 1917. Farmers in Florida would commonly get their crops to ripen in sheds by lighting kerosene lamps, which was originally thought to induce ripening from the heat. In 1924, Frank E. Denny discovered that it was the molecule ethylene emitted by the kerosene lamps that induced the ripening. It was not until 1934 that Gane reported that plants synthesize ethylene. In 1935, Crocker proposed that ethylene was the plant hormone responsible for fruit ripening as well as senescence of vegetative tissues.
Ethylene biosynthesis in plants
Ethylene is produced from essentially all parts of higher plants, including leaves, stems, roots, flowers, fruits, tubers, and seeds. Ethylene production is regulated by a variety of developmental and environmental factors. During the life of the plant, ethylene production is induced during certain stages of growth such as germination, ripening of fruits, abscission of leaves, and senescence of flowers. Ethylene production can also be induced by a variety of external aspects such as mechanical wounding, environmental stresses, and certain chemicals including auxin and other regulators. The pathway for ethylene biosynthesis is named the Yang cycle after the scientist Shang Fa Yang who made key contributions to elucidating this pathway.
Ethylene is biosynthesized from the amino acid methionine to S-adenosyl-L-methionine (SAM, also called Adomet) by the enzyme Met Adenosyltransferase. SAM is then converted to 1-aminocyclopropane-1-carboxylic acid (ACC) by the enzyme ACC synthase (ACS). The activity of ACS determines the rate of ethylene production, therefore regulation of this enzyme is key for the ethylene biosynthesis. The final step requires oxygen and involves the action of the enzyme ACC-oxidase (ACO), formerly known as the ethylene forming enzyme (EFE). Ethylene biosynthesis can be induced by endogenous or exogenous ethylene. ACC synthesis increases with high levels of auxins, especially indole acetic acid (IAA) and cytokinins.
Ethylene perception in plants
Ethylene is perceived by a family of five transmembrane protein dimers such as the ETR1 protein in Arabidopsis. The genes encoding ethylene receptors have been cloned in the reference plant Arabidopsis thaliana and many other plants. Ethylene receptors are encoded by multiple genes in plant genomes. Dominant missense mutations in any of the gene family, which comprises five receptors in Arabidopsis and at least six in tomato, can confer insensitivity to ethylene. Loss-of-function mutations in multiple members of the ethylene-receptor family result in a plant that exhibits constitutive ethylene responses. DNA sequences for ethylene receptors have also been identified in many other plant species and an ethylene binding protein has even been identified in Cyanobacteria.
Ethylene response to salt stress
A large portion of the soil has been affected by over salinity and it has been known to limit the growth of many plants. Globally, the total area of saline soil was 397,000,000 ha and in continents like Africa, it makes up 2 percent of the soil. The amount of soil salinization has reached 19.5% of the irrigated land and 2.1% of the dry-land agriculture around the world. Soil salinization affects the plants using osmotic potential by net solute accumulation. The osmotic pressure in the plant is what maintains water uptake and cell turgor to help with stomatal function and other cellular mechanisms. Over generations, many plant genes have adapted, allowing plants’ phenotypes to change and built different mechanisms to counter salinity effects.
The plant hormone ethylene is a combatant for salinity in most plants. Ethylene is known for regulating plant growth and development and adapted to stress conditions. Central membrane proteins in plants, such as ETO2, ERS1 and EIN2, are used for ethylene signaling in many plant growth processes. ETO2, Ethylene overproducer 2, is a protein that when mutated it will gain a function to continually produce ethylene even when there is no stress condition, causing the plant to grow short and stumpy. ERS1, Ethylene response sensor 1, is activated when ethylene is present in the signaling pathway and when mutated, it loses a function and cannot bind to ethylene. This means a response is never activated and the plant will not be able to cope with the abiotic stress. EIN2, Ethylene insensitive 2, is a protein that activates the pathway and when there is a mutation here the EIN2 will block ethylene stimulation and an ethylene response gene will not be activated. Mutations in these proteins can lead to heightened salt sensitivity and limit plant growth. The effects of salinity have been studied on Arabidopsis plants that have mutated ERS1 and EIN4 proteins. These proteins are used for ethylene signaling again certain stress conditions, such as salt and the ethylene precursor ACC is allowing suppress of any sensitivity to the salt stress. Mutations in these pathways can cause lack of ethylene signaling, causing stunt in plant growth and development.
Environmental and biological triggers of ethylene
Environmental cues such as flooding, drought, chilling, wounding, and pathogen attack can induce ethylene formation in plants. In flooding, roots suffer from lack of oxygen, or anoxia, which leads to the synthesis of 1-aminocyclopropane-1-carboxylic acid (ACC). ACC is transported upwards in the plant and then oxidized in leaves. The ethylene produced causes nastic movements (epinasty) of the leaves, perhaps helping the plant to lose water.
The corolla of a plant refers to its set of petals. Corolla development in plants is broken into phases from anthesis to corolla wilting. The development of the corolla is directed in part by ethylene, though its concentration is highest when the plant is fertilized and no longer requires the production or maintenance of structures and compounds that attract pollinators. The role of ethylene in the developmental cycle is as a hormonal director of senescence in corolla tissue. This is evident as ethylene production and emission are maximized in developmental phases post-pollination, until corolla wilting. Ethylene-directed senescence of corolla tissue can be observed as color change in the corolla or the wilting/ death of corolla tissue. At the chemical level, ethylene mediates the reduction in the amount of fragrance volatiles produced. Fragrance volatiles act mostly by attracting pollinators. Ethylene's role in this developmental scenario is to move the plant away from a state of attracting pollinators, so it also aids in decreasing the production of these volatiles.
Ethylene production in corolla tissue does not directly cause the senescence of corolla tissue, but acts by releasing secondary products that are consistent with tissue aging. While the mechanism of ethylene-mediated senescence are unclear, its role as a senescence-directing hormone can be confirmed by ethylene-sensitive petunia response to ethylene knockdown. Knockdown of ethylene biosynthesis genes was consistent with increased corolla longevity; inversely, up-regulation of ethylene biosynthesis gene transcription factors were consistent with a more rapid senescence of the corolla.
List of plant responses to ethylene
Ethylene shortens the shelf life of many fruits by hastening fruit ripening and floral senescence. Ethylene will shorten the shelf life of cut flowers and potted plants by accelerating floral senescence and floral abscission. Flowers and plants which are subjected to stress during shipping, handling, or storage produce ethylene causing a significant reduction in floral display. Flowers affected by ethylene include carnation, geranium, petunia, rose, and many others.
Ethylene can cause significant economic losses for florists, markets, suppliers, and growers. Researchers have developed several ways to inhibit ethylene, including inhibiting ethylene synthesis and inhibiting ethylene perception. Aminoethoxyvinylglycine (AVG), Aminooxyacetic acid (AOA), and silver salts are ethylene inhibitors. Inhibiting ethylene synthesis is less effective for reducing post-harvest losses since ethylene from other sources can still have an effect. By inhibiting ethylene perception, fruits, plants and flowers don't respond to ethylene produced endogenously or from exogenous sources. Inhibitors of ethylene perception include compounds that have a similar shape to ethylene, but do not elicit the ethylene response. One example of an ethylene perception inhibitor is 1-methylcyclopropene (1-MCP).
Commercial growers of bromeliads, including pineapple plants, use ethylene to induce flowering. Plants can be induced to flower either by treatment with the gas in a chamber, or by placing a banana peel next to the plant in an enclosed area.
Chrysanthemum flowering is delayed by ethylene gas and growers have found that carbon dioxide 'burners' and the exhaust fumes from inefficient glasshouse heaters can raise the ethylene concentration to 0.05 ppmv causing delay in flowering of commercial crops.
Ethylene is a ligand in organometallic chemistry. One of the first organometallic compounds, Zeise's salt is a complex of ethylene. Useful reagents containing ethylene include Pt(PPh3)2(C2H4) and Rh2Cl2(C2H4)4. The Rh-catalysed hydroformylation of ethylene is conducted on industrial scale to provide propionaldehyde.
Ethylene appears to have been discovered by Johann Joachim Becher, who obtained it by heating ethanol with sulfuric acid; he mentioned the gas in his Physica Subterranea (1669). Joseph Priestley also mentions the gas in his Experiments and observations relating to the various branches of natural philosophy: with a continuation of the observations on air (1779), where he reports that Jan Ingenhousz saw ethylene synthesized in the same way by a Mr. Enée in Amsterdam in 1777 and that Ingenhousz subsequently produced the gas himself. The properties of ethylene were studied in 1795 by four Dutch chemists, Johann Rudolph Deimann, Adrien Paets van Troostwyck, Anthoni Lauwerenburgh and Nicolas Bondt, who found that it differed from hydrogen gas and that it contained both carbon and hydrogen. This group also discovered that ethylene could be combined with chlorine to produce the oil of the Dutch chemists, 1,2-dichloroethane; this discovery gave ethylene the name used for it at that time, olefiant gas (oil-making gas.)
In the mid-19th century, the suffix -ene (an Ancient Greek root added to the end of female names meaning "daughter of") was widely used to refer to a molecule or part thereof that contained one fewer hydrogen atoms than the molecule being modified. Thus, ethylene (C
In 1866, the German chemist August Wilhelm von Hofmann proposed a system of hydrocarbon nomenclature in which the suffixes -ane, -ene, -ine, -one, and -une were used to denote the hydrocarbons with 0, 2, 4, 6, and 8 fewer hydrogens than their parent alkane. In this system, ethylene became ethene. Hofmann's system eventually became the basis for the Geneva nomenclature approved by the International Congress of Chemists in 1892, which remains at the core of the IUPAC nomenclature. However, by that time, the name ethylene was deeply entrenched, and it remains in wide use today, especially in the chemical industry.
Following experimentation by Luckhardt, Crocker, and Carter at the University of Chicago, ethylene was used as an anesthetic. It remained in use through the 1940s use even while chloroform was being phased out. Its pungent odor and its explosive nature limit its use today.
The 1979 IUPAC nomenclature rules made an exception for retaining the non-systematic name ethylene, however, this decision was reversed in the 1993 rules and remains unchanged in the newest 2013 recommendations so the IUPAC name is now ethene. Note that in the IUPAC system, the name ethylene is reserved for the divalent group -CH2CH2-. Hence, names like ethylene oxide and ethylene dibromide are permitted, but the use of the name ethylene for the two-carbon alkene is not. Nevertheless, use of the name ethylene for H2C=CH2 is still prevalent among chemists in North America.